Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh B209 Aficio 3030 R-C4

Code: 101

Description: Exposure lamp error 1
The standard white level was not detected properly when scanning the white plate.
Causes: • Exposure lamp defective • Lamp stabilizer defective • Exposure lamp connector defective • Standard white plate dirty • Scanner mirror or scanner lens out of position or dirty • SBU defective

Code: 102

Description: Exposure lamp error 2
The exposure lamp was on longer than the allowed time (3 min.) after scanning of the originals was completed.
Causes: • SBCU defective • IPU defective • Controller board defective

Code: 120

Description: Scanner home position error 1
The scanner home position sensor does not detect the on condition during initialization or copying.
Causes: • Scanner motor defective • Scanner motor drive board defective • Scanner HP sensor defective • Harness between SBCU and HP sensor loose, disconnected, damaged • Harness between SBCU and scanner motor loose, disconnected, damaged • SBCU defective • Scanner wire, timing belt, pulley, or carriage defective

Code: 121

Description: Scanner home position error 2
The scanner home position sensor does not detect the off condition during initialization.
Causes: • Scanner motor defective • Scanner motor drive board defective • Scanner HP sensor defective • Harness between SBCU and HP sensor loose, disconnected, damaged • Harness between SBCU and scanner motor loose, disconnected, damaged • SBCU defective • Scanner wire, timing belt, pulley, or carriage defective

Code: 122

Description: Scanner HP Sensor - Error 1
The HP sensor remains on while the carriage is returning to the home position.
Causes: • Scanner motor defective • Scanner motor drive board defective • Scanner HP sensor defective • Harness between SBCU and HP sensor loose, disconnected, damaged • Harness between SBCU and scanner motor loose, disconnected, damaged • SBCU defective • Scanner wire, timing belt, pulley, or carriage defective

Code: 123

Description: Scanner HP sensor - Error 2
The HP sensor does not switch on after the carriage has returned to the home position.
Causes: • Scanner motor defective • Scanner motor drive board defective • Scanner HP sensor defective • Harness between SBCU and HP sensor loose, disconnected, damaged • Harness between SBCU and scanner motor loose, disconnected, damaged • SBCU defective • Scanner wire, timing belt, pulley, or carriage defective

Code: 141

Description: Black offset correction error
Black offset could not be corrected after SP4800 was done.
Causes: • Lens block defective • SBCU defective

Code: 143

Description: SBU auto adjust error
The machine could not acquire the white or black peak level setting at power on, or after SP4428 (SBU Auto Adjust) was done.
Causes: • Exposure lamp disconnected • There is no blank sheet of A3 size paper on the platen • White plate dirty or missing
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie