Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh B236 MP1350 B-C3 — Trang 24/25

Code: SC953

Description: Scanner Image Setting Error
The settings required for image processing using the scanner are not sent from the IPU
Causes: • Check the harnesses, connectors between the MCU and BCU
• Update the BCU, MCU firmware
• MCU defective
• BCU defective
• IPU defective

Code: SC954

Description: Printer Image Setting Error
The settings that are required for image processing using the printer controller are not sent from the IPU
Causes: • Check the harnesses, connectors to the LDB and IPU
• Check the harnesses, connectors between IPU/LDB, LDB/Polygon Mirror Motor PCB
• Update the BCU firmware
• LD defective
• IPU defective
• Polygon mirror motor or polygon mirror motor PCB defective

Code: SC955

Description: Memory Setting Error
The settings that are required for image processing using the memory are not sent from the IPU.
Causes: • Software bug
• Hard disk unit defective
• Controller defective
• MCU defective
• IPU defective

Code: SC964

Description: Scanner Start Error
During scanned image processing, another command to start scanning was received.
Causes: • Software bug

Code: SC965

Description: Print Start Error
During print processing, another command to start printing was received
Causes: • Software bug

Code: SC966

Description: Polygon Mirror Motor Ready Error
The polygon mirror motor does not reach ready status within 15 s after the copy paper is detected by the registration sensor. (15 s after the write request was issued for the IPU, the FGATE signal remained LOW.)
Causes: • Polygon mirror motor harness, connections to BCU loose, broken, defective
• Polygon mirror motor drive board harness, connector to BCU loose, broken, defective
• Polygon mirror motor defective
• Polygon mirror motor drive board defective
• BCU defective

Code: SC970

Description: Scanner Ready Error
The scan ready signal is not generated by the MCU for more than 10 s after the read start signal is sent to the MCU.
Causes: • Software bugSoftware bugny
• Harnesses, connectors to the MCU loose, broken, defective
• MCU defective
• BCU defective

Code: SC990

Description: Software Performance Error 1
An unexpected operation was encountered by the software.
Causes: • Software crash; reboot the machine
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie