Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh B277 MP2000 K-C3 — Trang 7/11

Code: 761

Description: ADF gate abnormal 2
The FGATE signal is not issued from the ADF within 30 seconds after the ADF starts feeding.
Causes: - ADF connector defective
- SBU board defective

Code: 762

Description: ADF gate abnormal 3
The FGATE signal is not terminated by the ADF within 60 seconds after the ADF starts feeding.
Causes: - ADF connector defective
- SBU board defective

Code: 800

Description: Startup without video output end error
Video transfer to the engine is started, but the engine did not issue a video transmission end command within the specified time.
Causes: - Controller board defective

Code: 804

Description: Startup without video input end
A video transmission was requested from the scanner, but the scanner did not issue a video transmission end command within the specified time.
Causes: - Controller board defective

Code: 818

Description: Watchdog error
The CPU does not access the watchdog register within a certain time.
Causes: - Controller board defective
- Software malfunction - download controller firmware again

Code: 819

Description: Kernel mismatch error
Software bug
Causes: - Download controller firmware again

Code: 820

Description: Self-Diagnostic Error: CPU
The central processing unit returned an error during the self-diagnostic test.
Causes: - Controller board defective
- Download controller firmware again

Code: 821

Description: Self-Diagnostic Error: ASIC
The ASIC returned an error during the selfdiagnostic test because the ASIC and CPU timer interrupts were compared and determined to be out of range.
Causes: - Controller board defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie