Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D062 MP6001 MT-C4 — Trang 14/27

Code: 728

Description: Shift jogger retraction motor error (B703)
The side fences do not retract within the prescribed time after the retraction motor switches on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Motor harness disconnected, loose, defective • Motor defective • Motor overload • HP defective
Remedy:

Code: 740

Description: Finisher corner stapler motor error
The stapler motor does not switch off within the prescribed time after operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Staple jam • Number of sheets in the stack exceeds the limit for stapling • Stapler motor disconnected, defective
Remedy:

Code: 741

Description: Finisher corner stapler rotation motor error
The stapler does not return to its home position within the specified time after stapling. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Stapler rotation motor disconnected, defective • Stapler rotation motor overloaded due to obstruction • Stapler rotation HP sensor disconnected, defective
Remedy:

Code: 742

Description: Finisher stapler movement motor error
The stapler HP sensor is not activated within the specified time after the stapler motor turned on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Stapler movement motor disconnected, defective • Stapler movement motor overloaded due to obstruction • Stapler HP sensor disconnected, defective
Remedy:

Code: 743

Description: Booklet stapler motor error 1
The front stapler unit saddle-stitch motor does not start operation within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Front motor disconnected, defective • Front motor overloaded due to obstruction
Remedy:

Code: 744

Description: Booklet stapler motor error 2
The rear stapler unit saddle-stitch motor does not start operation within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Rear motor disconnected, defective • Rear motor overloaded due to obstruction
Remedy:

Code: 745

Description: Feed-Out Belt Motor Error (D373/B830)
The stack feed-out belt HP sensor does not activate within the specified time after the stack feed-out belt motor turns on. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: If the motor is operating 1. Stack feed-out HP sensor harness loose, broken, defective 2. Stack feed-out HP sensor defective If the motor is not operating: 1. Feed-out motor blocked by an obstruction 2. Feed-out motor harness loose, broken, defective 3. Feed-out motor defective 4. Booklet finisher main board defective
Remedy:

Code: 746

Description: Stack Plate Motor Error 1: Front Motor (B830)
The stack plate HP sensor (front) does not activate within 500 ms after the motor turns on. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: If the motor is operating 1. Front stack plate HP sensor harness loose, broken, defective 2. Front stack plate HP sensor defective If the motor is not operating: 1. Motor blocked by an obstruction 2. Motor harness loose, broken, defective 3. Motor defective 4. Booklet finisher main board defective
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie