Causes: [6101] MAC address check sum error The result of the MAC address check sum does not match the check sum stored in ROM. [6104] PHY IC error The PHY IC on the controller cannot be correctly recognized. [6105] PHY IC loop-back error An error occurred during the loop-back test for the PHY IC on the controller. - 1. Replace the controller.
Causes: 0F30 0F31 ASIC (Mandolin) for system control could not be detected. After the PCI configuration, the device ID for the ASIC could not be checked. • ASCI (Mandolin) for system control is defective • Interface between North Bridge and AGPI is defective • Replace the mother board 0F41 The read/write check done for resident RAM on the mother board could not be done correctly. • Memory device defective • Replace the mother board 50B1 Could not initialize or read the bus connection. • Bus connection defective, loose • SSCG defective • Replace the mother board 50B2 Value of the SSCG register is incorrect. • Bus connection loose, defective • SSCG defective • Replace the mother board
Causes: 5101 The write/verify check for the optional RAM chip on the engine mother board gave an error. • Controller defective • Mother board defective
Description: Wireless LAN Error 1 During machine start-up, the machine can get access to the board that holds the wireless LAN, but not to the wireless LAN card (802.11b or Bluetooth).
Causes: • Wireless LAN card missing (was removed)
Remedy:
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.