Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D081 MPC6501 V-C3 — Trang 23/44

Code: SC516

Description: Duplex jogger motor error 2
When the jogger fence moves from the home position, the jogger fence HP sensor does not turn off even if the jogger motor has moved the jogger fence 153.5 mm.
Causes: • Jogger fence motor defective or poor connection • Paper or other obstacle interfering with operation of the sensors or motor • Return sensor or HP sensor defective, dirty, or disconnected • Paper or other obstacle has jammed mechanism • HP sensor connector disconnected or defective • HP sensor defective

Code: SC517

Description: LCIT air assist front fan error
The front air assist fan is not functioning properly.
Causes: • Fan harness disconnected or damaged • Fan blocked by an obstruction • Fan damaged, defective

Code: SC518

Description: LCIT air assist rear fan error
The rear air assist fan is not functioning properly.
Causes: • Fan harness disconnected or damaged • Fan blocked by an obstruction • Fan damaged, defective

Code: SC530

Description: Fusing cooling fan error
The VBCU did not receive the lock signal 5 seconds after the fusing unit fan switches on.
Causes: • Fan harness disconnected or damaged • Fan blocked by an obstruction • Fan damaged

Code: SC531

Description: Fusing Fan Error: Front
The lock signal remained HIGH for 5 sec. while the fan at the front of the fusing unit near the heat dissipation fins was operating.
Causes: • Fan harness disconnected or damaged • Fan blocked by an obstruction • Fan damaged

Code: SC532

Description: Controller fan error
The lock signal remained HIGH for 5 sec. while the fan that cools the printed circuit boards was operating.
Causes: • Fan harness disconnected or damaged • Fan blocked by an obstruction • Fan damaged

Code: SC533

Description: Fusing unit suction fan error
The lock signal remained HIGH for 5 sec. while the fan that draws air out of the fusing unit was operating.
Causes: • Fan harness disconnected or damaged • Fan blocked by an obstruction • Fan damaged

Code: SC533-1

Description: Fusing exit fan error
The machine detected a fan lock signal 5 times at 1 sec. intervals. This indicates that the fan is not operating and the machine stops.
Causes: • Fan connection loose, broken, defective • Fan is blocked by an obstruction • Fan motor is defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie