Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D082 MPC7501 V-C3 — Trang 38/44

Code: SC783-6

Description: Dynamic Roller Transport Motor Error Multi Folder (D454)
The motor drive PCB detected an error at the motor.
Causes: • Motor harness or connector loose, broken, defective • Motor or motor drive board defective

Code: SC783-7

Description: Reg. Roller Transport Motor Error Multi Folder (D454)
The motor drive PCB detected an error at the motor.
Causes: • Motor harness or connector loose, broken, defective • Motor or motor drive board defective

Code: SC783-8

Description: Dynamic Roller Lift Motor Error Multi Folder (D454)
The dynamic roller HP sensor did not detect the dynamic roller in (or out of) its home position within the prescribed time. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code.
Causes: • Dynamic roller HP sensor dirty • Sensor harness or connector loose, broken, defective • Dynamic roller lift motor harness or connector loose, broken, defective • Sensor defective • Motor or motor drive board defective

Code: SC783-9

Description: Registration Roller Release Motor Error Multi Folder (D454)
The registration roller HP sensor did not detect the registration roller in (or out of) its home position within the prescribed time. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code.
Causes: • Registration roller HP sensor dirty • Sensor harness or connector loose, broken, defective • Registration roller release motor harness or connector loose, broken, defective • Sensor defective • Motor or motor drive board defective

Code: SC784

Description: Z-Fold Timing Sensor Adjustment Error 1
The output voltage light emitted from the sensor changed, but the return input was not sufficient to attain V0.
Causes: • Sensor, mirror dirty from paper dust, other particles • Harness loose, broken, defective • Mirror out of position

Code: SC785

Description: Z-Fold Timing Sensor Adjustment Error 2
The output voltage light emitted from the sensor changed, but the return input was not sufficient to attain V0.
Causes: • Sensor, mirror dirty from paper dust, other particles • Harness loose, broken, defective • Mirror out of position

Code: SC786

Description: Z-Fold Memory Error
Several attempts to write to the Zfold memory failed.
Causes: • Turn the machine power off/on • EEPROM on Z-Folder main board defective

Code: SC789

Description: Proof Tray Exit Motor Error Multi Folder (D454)
The motor drive PCB detected an error at the motor due to overload, overheating. Paper cannot exit at proof tray.
Causes: • Motor, motor drive board defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie