Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D117 MPC305SPF GR-C1 — Trang 4/21

Code: 231-03

Description: FGATE OFF error: Ma
The PFGATE ON signal still asserts within 5 seconds after processing finish timing for black (-01), cyan (-02), magenta (-03) or yellow (-04) color writing. The PFGATE ON signal still asserts when the next job starts.
Causes: Defective ASIC (Lupus). Poor connection between controller and BICU. Defective BICU
Remedy: 1. Check the connection between the controller board and the BICU. 2. Replace the BICU. 3. Replace the controller board.

Code: 231-04

Description: FGATE OFF error: Ye
The PFGATE ON signal still asserts within 5 seconds after processing finish timing for black (-01), cyan (-02), magenta (-03) or yellow (-04) color writing. The PFGATE ON signal still asserts when the next job starts.
Causes: Defective ASIC (Lupus). Poor connection between controller and BICU. Defective BICU
Remedy: 1. Check the connection between the controller board and the BICU. 2. Replace the BICU. 3. Replace the controller board.

Code: 240-01

Description: LD error: Bk or Cy
The BICU detects an LD error a few times consecutively when the LDB unit turns on after LDB initialization.
Causes: Worn-out LD. Disconnected or broken harness of the LD
Remedy: 1. Replace the harness of the LD. 2. Replace the laser optics housing unit. 3. Replace the BICU.

Code: 240-03

Description: LD error: Ma or Ye
The BICU detects an LD error a few times consecutively when the LDB unit turns on after LDB initialization.
Causes: Worn-out LD. Disconnected or broken harness of the LD
Remedy: 1. Replace the harness of the LD. 2. Replace the laser optics housing unit. 3. Replace the BICU.

Code: 260-01

Description: Writing temperature thermistor error: Bk - Cy
The temperature thermistor output is no more than 0.81 V or no less than 2.95 V.
Causes: No thermistor is installed or disconnected connectors. Defective thermistor
Remedy: 1. Check the connection of the connectors. 2. Replace the thermistor.

Code: 260-03

Description: Writing temperature thermistor error: Ma - Ye
The temperature thermistor output is no more than 0.81 V or no less than 2.95 V.
Causes: No thermistor is installed or disconnected connectors. Defective thermistor
Remedy: 1. Check the connection of the connectors. 2. Replace the thermistor.

Code: 285

Description: MUSIC error
Line position adjustment fails four consecutive times.
Causes: Pattern sampling error (insufficient image density). Defective TM sensors. Defective image transfer belt unit. Defective PCDU(s). Defective laser optics housing unit.
Remedy: 1. Check and reinstall the image transfer belt unit and PCDUs. 2. Check if each toner bottle has enough toner. 3. Replace the TM sensor. 4. Replace the image transfer belt unit. 5. Replace the PCDU(s). 6. Replace the laser optics housing unit.

Code: 312

Description: Charge P.P. output error: Bk
The feedback voltage of the charge AC for each color is 0.3 V or less for 0.2 seconds after the charge AC has turned on.
Causes: Disconnected or broken harnesses of the HVPS. Defective PCDU. Defective HVPS.
Remedy: 1. Check or replace the harnesses of the HVPS. 2. Reinstall or replace the PCDU. 3. Replace the HVPS.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie