Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D133 MP9002 — Trang 14/33

Code: 637-02

Description: Tracking information notification error: Management server error The machine failed to give notice of the tracking information to the management server. Tracking information was lost, and the machine could not count correctly.
Causes: • Cycle the machine off/on

Code: 640

Description: Engine-to-Controller Communication Error This is a checksum error.
Causes: • PCI hardware error

Code: 641

Description: Engine serial communication error An error occurs in serial communication with engine.
Causes: • SC641-1: Timeout error • SC641-2: Retry over • SC641-3: Download error • SC641-4: UART error

Code: 650-01

Description: Remote communication error (Cumin-M)
Causes: The authentication for the Cumin-M fails failed at a dial up connection due to one or more of the following: • Incorrect SP settings • Disconnected telephone line • Disconnected modem board • Disconnected wireless LAN card

Code: 650-04

Description: Remote communication error (Cumin-M): Communication line error The supplied voltage is not sufficient due to the defective communication line or defective connection.
Causes: The authentication for the Cumin-M fails failed at a dial up connection due to one or more of the following: • Incorrect SP settings • Disconnected telephone line • Disconnected modem board • Disconnected wireless LAN card

Code: 650-05

Description: Remote communication error (Cumin-M): No modem board Modem board is not installed even though the setting at Cumin-M (During the operation)
Causes: The authentication for the Cumin-M fails failed at a dial up connection due to one or more of the following: • Incorrect SP settings • Disconnected telephone line • Disconnected modem board • Disconnected wireless LAN card

Code: 650-13

Description: Remote communication error (Cumin-M): Modem board error 1 Modem board not installed or the board is defective.
Causes: • Install the modem board. • Check correct setting value for modem driver (SP5-816-160, SP5-816-165 to 171, SP5-816-188 and 189). • Replace the modem board

Code: 650-14

Description: Remote communication error (Cumin-M): Modem board error 2 Modem board not installed or the board is defective.
Causes: • Uninstall the modem board if it is installed. • Check that the wired/wireless LAN is working properly.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie