Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D135 MPC6502SP CH-C1 — Trang 21/63

Code: SC410-04

Description: Residual Voltage (Vr) Detection Error (Y). Residual Voltage (Vr) > 200[-V] Details: This SC is issued when the residual voltage measured duringprocess control exceeded 200 [-V].
Causes: • Toner density error • Condensation
Remedy: • Replace the developer. • If condensation has formed, wait a while and repeat process control.

Code: SC411-04

Description: Failed to adjust the DC charge bias to the target range: Vd*± 8V. Details: This SC is issued when the machine fails to adjust the DC charge bias to the target range: Vd*± 8V during process contol.
Causes: • Charge roller dirty
Remedy: • Replace the charge roller.

Code: SC412-01

Description: LD input current (Vpl) Adjustment Error (K). Failed to adjust the LD power to the target range: Vpl*± 5V. Details: This SC is issued when the machine fails to adjust the LD power to the target range: Vpl*± 5V during process contol.
Causes: • OPC drum deteriorated (Filming etc.) • Charge roller dirty
Remedy: • Replace the OPC drum. • Replace the charge roller.

Code: SC412-02

Description: LD input current (Vpl) Adjustment Error (C). Failed to adjust the LD power to the target range: Vpl*± 5V. Details: This SC is issued when the machine fails to adjust the LD power to the target range: Vpl*± 5V during process contol.
Causes: • OPC drum deteriorated (Filming etc.) • Charge roller dirty
Remedy: • Replace the OPC drum. • Replace the charge roller.

Code: SC412-03

Description: LD input current (Vpl) Adjustment Error (M). Failed to adjust the LD power to the target range: Vpl*± 5V. Details: This SC is issued when the machine fails to adjust the LD power to the target range: Vpl*± 5V during process contol.
Causes: • OPC drum deteriorated (Filming etc.) • Charge roller dirty
Remedy: • Replace the OPC drum. • Replace the charge roller.

Code: SC412-04

Description: LD input current (Vpl) Adjustment Error (Y). Failed to adjust the LD power to the target range: Vpl*± 5V. Details: This SC is issued when the machine fails to adjust the LD power to the target range: Vpl*± 5V during process contol.
Causes: • OPC drum deteriorated (Filming etc.) • Charge roller dirty
Remedy: • Replace the OPC drum. • Replace the charge roller.

Code: SC421-01

Description: OPC home position signal detection error (K). Failed to detect the home position signal within specified time.
Causes: • Home position sensor defective/Loose connection/Harness broken/Connecter disconnected • Home position sensor smudged
Remedy: • Check the home position sensor connector. • Check the home position sensor harness. • Replace the home position sensor if it is found to be defective. • Check the sensor for smudges. Blow it with air and check again.

Code: SC421-02

Description: OPC home position signal detection error (C). Failed to detect the home position signal within specified time.
Causes: • Home position sensor defective/Loose connection/Harness broken/Connecter disconnected • Home position sensor smudged
Remedy: • Check the home position sensor connector. • Check the home position sensor harness. • Replace the home position sensor if it is found to be defective. • Check the sensor for smudges. Blow it with air and check again.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie