Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D136 MPC8002SP CH-C1 — Trang 48/63

Code: SC720-78

Description: Trailing Edge Pressure Plate Motor Error (D703/D704) • Motor driver detected an error (DC motor control error). (The first time: jam display, the second time: SC) • When moving to the home position, home position was not detected within specified time (t0 sec). (The first time: jam display, the second time: SC) • When moving from the home position, home position was still detected after specified time (t1 sec). (The first time: jam display, the second time: SC)
Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.

Code: SC720-80

Description: Protection device break error 2 (D703/D704) Protection device break error (fuse tripped)
Causes: • Short-circuit • Overload • Motor/solenoid defective
Remedy: D703/D704: • Check the harness/replace the PCB. Inserter: • Check the harness. • Replace the PCB. • Replace the motor.

Code: SC722-10

Description: Upper Transport Motor Error (D707) • Motor pulse not detected for a specified time. (The first time: jam display, the second time: SC) • The motor speed does not reach the specified value after a specified time (t1msec) from motor startup.
Causes: • Motor defective • Connecter disconnected • Overload
Remedy: • Check motor connection. • Replace the motor. • Replace the PCB.

Code: SC722-14

Description: Lower Transport Motor Error (D707) • Motor pulse not detected for a specified time. (The first time: jam display, the second time: SC)
Causes: • Motor defective • Connecter disconnected • Overload
Remedy: • Check motor connection. • Replace the motor. • Replace the PCB.

Code: SC722-15 ... SC722-18

Description: SC722-15 B Pre-stack Tansport Motor Error (D707) SC722-16 B Upper Tray Exit Motor Error (D707) SC722-17 B Shift Tray Exit Motor Error (D707) SC722-18 B Stapler Exit Motor Error (D707). Motor driver detected an open circuit or short-circuit. (SC from the first time)
Causes: • Motor defective • Connecter disconnected
Remedy: • Check motor connection. • Replace the motor. • Replace the PCB.

Code: SC722-20 ... SC722-23

Description: SC722-20 B Upper Tray Junction Gate Motor Error (D707) SC722-21 B Stapler Junction Gate Motor Error (D707) SC722-22 B Pre-stack Junction Gate Motor Error (D707) SC722-23 B Pre-stack Paper Stopper Motor Error (D707). • When moving to the home position, home position was not detected within specified time (t0 ms). (The first time: jam display, the second time: SC) • When moving from the home position, home position was still detected after specified time (t1 ms). (The first time: jam display, the second time: SC)
Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.

Code: SC722-24

Description: Exit Guide Motor Error (D707) • When moving to the home position, home position was not detected within specified time (t0 ms). (The first time: jam display, the second time: SC) • When moving from the home position, home position was still detected after specified time (t1 ms). (The first time: jam display, the second time: SC)
Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.

Code: SC722-25

Description: Punch Motor Error (D707) • No change to the punch home position sensor after a specified time (t1ms) from punch operation. (The first time: jam display, the second time: SC) • No change to the punch home position sensor within a specified number of pulses (p0 pulses) from punch operation. (The first time: jam display, the second time: SC)
Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie