Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D141 MP3352 — Trang 19/22

Code: 867

Description: SD card error 2: SD card removed
The SD card in the boot slot when the machine was turned on was removed while the machine power was on.
Causes: • The SD card is ejected from the slot.
Remedy: 1. Install the SD card. 2. Turn the main switch off and on.

Code: 868

Description: SD card error 3: SD card access
An error occurred while an SD card was used.
Causes: • SD card not inserted correctly • SD card defective • Controller board defective Note: If you want to try to reformat the SD card, use SD Formatter Ver 1.1.
Remedy: 1. Check the SD card is inserted correctly. 2. Replace the SD card. 3. Replace the controller board.

Code: 870

Description: Address Book Data Error
Address book data stored on the hard disk was detected as abnormal when it was accessed from either the operation panel or the network.
Causes: • Defective software program • Defective HDD • Incorrect path to the server
Remedy: 1. Initialize the address book data (SP5-846-050). 2. Initialize the user information (SP5-832-006). 3. Replace the HDD.

Code: 872

Description: HDD mail RX data abnormal
An error was detected at power on. The data received during mail receive could be neither read nor written.
Causes: • Defective HDD • Power failure during an access to the HDD
Remedy: 1. Turn the main switch off and on. 2. Initialize the HDD partition (SP5-832-007). 3. Replace the HDD.

Code: 873

Description: HDD mail TX data error
An error was detected on the HDD immediately after the machine was turned on, or power was turned off while the machine used the HDD.
Causes: • Defective HDD • Power failure during an access to the HDD
Remedy: 1. Do SP5832-8 (Format HDD – Mail TX Data) to initialize the HDD. 2. Replace the HDD.

Code: 874

Description: Delete All error 1: HDD
A data error was detected for the HDD/NVRAM after the Delete All option was used. Note: The source of this error is the Data Overwrite Security Unit D362 running from an SD card.
Causes: • Data Overwrite Security Unit (SD card) not installed • Defective HDD
Remedy: 1. Turn the main switch off/on, and try the operation again. 2. Install the Data Overwrite Security Unit. 3. Replace the HDD.

Code: 875

Description: Delete All error 2: Data area
An error occurred while the machine deleted data from the HDD. Note: The source of this error is the Data Overwrite Security Unit running from an SD card.
Causes: • The logical format for the HDD fails
Remedy: Turn the main switch off/on, and try the operation again.

Code: 876

Description: Log Data Error
Causes: An error was detected in the handling of the log data at power on or during machine operation. This can be caused by switching the machine off while it is operating.
Remedy: -001 Log Data Error 1 • Damaged log data file in the HDD Initialize the HDD with SP5832-004. -002 Log Data Error 2 • An encryption module not installed 1. Disable the log encryption setting with SP9730-004 ("0" is off.) 2. Install the DESS module. -003 Log Data Error 3 • Invalid log encryption key due to defective NVRAM data 1. Initialize the HDD with SP5832-004. 2. Disable the log encryption setting with SP9730-004 ("0" is off.) -004 Log Data Error 4 • Unusual log encryption function due to defective NVRAM data Initialize the HDD with SP5832-004. -005 Log Data Error 5 • Installed NVRAM or HDD which is used in another machine 1. Reinstall the previous NVRAM or HDD. 2. Initialize the HDD with SP5832-004. -099 Log Data Error 99 • Other than the above causes Ask your supervisor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie