Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D141 MP3352 — Trang 20/22

Code: 877

Description: Data Overwrite Security SD card error
The 'all delete' function did not execute but the Data Overwrite Security Unit is installed and activated.
Causes: • Defective SD card • SD card not installed
Remedy: 1. Replace the NVRAM and then install the new SD card. 2. Check and reinstall the SD card.

Code: 878

Description: TPM electronic recognition error
The main machine firmware failed to recognize TPM because USB flash is not operating or a system module was updated incorrectly.
Causes: • Incorrect updating for the system firmware • Defective flash ROM on the controller board
Remedy: Replace the controller board

Code: 880

Description: File format converter error
A request for access to the File Format Converter (MLB) was not answered within the specified time.
Causes: • File format converter disconnected • Defective file format converter
Remedy: 1. Check the file format converter is connected correctly. 2. Replace the file format converter.

Code: 881

Description: Authentication area error
Authentication application error is detected.
Causes: • Error data in an authentication application reaches the management limit.
Remedy: Turn the main switch off and on.

Code: 899

Description: Software performance error
If the processing program shows abnormal performance and the program is abend, this SC is issued.
Causes: • Controller board defective • Software defective
Remedy: 1. Replace the controller board. 2. Turn the main switch off and on. 3. Update the firmware on the controller.

Code: 900

Description: Electrical total counter error
The total count contains something that is not a number
Causes: • NVRAM incorrect type • NVRAM defective • NVRAM data scrambled • Unexpected error from external source
Remedy: 1. Check the connection between the NVRAM and controller. 2. Replace the NVRAM. 3. Replace the controller board.

Code: 901

Description: Mechanical total counter error
The counter was moved during standby or while it is operating, possibly damaging the connector.
Causes: • Counter defective
Remedy: Check the connection of the mechanical counter

Code: 920

Description: Printer Error 1
An internal application error was detected and operation cannot continue.
Causes: • Software defective • Unexpected hardware resource (e.g., memory shortage)
Remedy: 1. Software defective; switch off/on, or change the controller firmware if the problem is not solved 2. Insufficient memory
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie