Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D182 MP2553 OR-C2 — Trang 20/30

Code: SC794-02

Description: Rear jogger motor error without 1-bin tray (D586) The machine does not detect a correct signal from the rear jogger fence HP sensor while the rear jogger motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Defective front jogger motor • Loosen connection • Motor overload • Defective front jogger fence HP sensor
Remedy: • Reset the connector • Replace the front jogger fence HP sensor. • Replace the front jogger motor.

Code: SC794-03

Description: Pick-up roller contact motor error without 1-bin tray (D586) The machine does not detect a correct signal from the pick-up roller HP sensor while the pick-up roller contact motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Defective pick-up roller contact motor • Loosen connection • Motor overload • Defective pick-up roller HP sensor
Remedy: • Reset the connector • Replace the pick-up roller HP sensor. • Replace the pick-up roller contact motor.

Code: SC794-04

Description: Exit guide plate motor error without 1-bin tray (D586) The machine does not detect a correct signal from the exit guide plate HP sensor while the exit guide plate motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Defective exit guide plate motor • Loosen connection • Motor overload • Defective exit guide plate HP sensor
Remedy: • Reset the connector • Replace the exit guide plate HP sensor. • Replace the exit guide plate motor.

Code: SC794-05

Description: Output tray motor error without 1-bin tray (D586) The machine does not detect a correct signal from the stack height detection lever sensor while the output tray motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Defective output tray motor • Loosen connection • Motor overload • Defective stack height detection lever sensor
Remedy: • Reset the connector • Replace the stack height detection lever sensor. • Replace the output tray motor.

Code: SC794-06

Description: Stack height detection lever motor error without 1-bin tray (D586) The machine does not detect a correct signal from the stack height detection lever HP sensor while the stack height detection lever motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Defective stack height detection lever motor • Loosen connection • Motor overload • Defective stack height detection lever HP sensor • Defective stack height detection lever sensor
Remedy: • Reset the connector • Replace the stack height detection lever sensor. • Replace the output tray motor.

Code: SC794-07

Description: Punch drive motor error without 1-bin tray (D586) The machine does not detect a correct signal from the punch position sensor while the punch drive motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Defective punch drive motor • Loosen connection • Motor overload • Defective punch position sensor
Remedy: • Reset the connector • Replace the punch position sensor. • Replace the punch drive motor.

Code: SC794-08

Description: Punch movement motor error without 1-bin tray (D586) The machine does not detect a correct signal from the punch position sensor while the punch movement motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Defective punch movement motor • Loosen connection • Motor overload • Defective punch position sensor
Remedy: • Reset the connector • Replace the punch position sensor. • Replace the punch movement motor.

Code: SC794-09

Description: Paper position sensor unit motor error without 1-bin tray (D586) The machine does not detect a correct signal from the paper position detection unit HP sensor while paper position sensor unit motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Defective paper position sensor unit motor • Loosen connection • Motor overload • Defective paper position detection unit HP sensor
Remedy: • Reset the connector • Replace the paper position detection unit HP sensor. • Replace the paper position sensor unit motor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie