Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D182 MP2553 OR-C2 — Trang 21/30

Code: SC794-10

Description: Stapler motor error. The machine does not detect a correct signal from the stapler motor HP sensor while thestapler motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Staple jam • Defective stapler motor • Loosen connection • Motor overload • Defective stapler motor HP sensor
Remedy: • Remove the jammed staple. • Reset the connector • Replace the stapler motor HP sensor. • Replace the stapler motor.

Code: SC794-11

Description: Stapler unit motor error without 1-bin tray (D586) The machine does not detect a correct signal from the stapler unit motor HP sensor while the stapler unit motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Defective stapler unit motor • Loosen connection • Motor overload • Defective stapler unit motor HP sensor
Remedy: • Reset the connector • Replace the stapler unit HP sensor. • Replace the stapler unit motor.

Code: SC794-12

Description: Shift roller motor error without 1-bin tray (D586) The machine does not detect a correct signal from the shift roller HP sensor while the shift roller motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Defective shift roller motor • Loosen connection • Motor overload • Defective shift roller HP sensor
Remedy: • Reset the connector • Replace the shift roller HP sensor. • Replace the shift roller motor.

Code: SC816-01

Description: Subsystem error
Causes: Energy save I/O subsystem detected some abnormality. • Energy save I/O subsystem defective • Energy save I/O subsystem detected a controller board error (non-response). • Error was detected during preparation for transition to STR.
Remedy: • Turn the main power off/on. • Replace the controller board.

Code: SC816-02

Description: Sysarch (LPUX_GET_PORT_INFO) error
Causes: Energy save I/O subsystem detected some abnormality. • Energy save I/O subsystem defective • Energy save I/O subsystem detected a controller board error (non-response). • Error was detected during preparation for transition to STR.
Remedy: • Turn the main power off/on. • Replace the controller board.

Code: SC816-03

Description: Transition to STR was denied.
Causes: Energy save I/O subsystem detected some abnormality. • Energy save I/O subsystem defective • Energy save I/O subsystem detected a controller board error (non-response). • Error was detected during preparation for transition to STR.
Remedy: • Turn the main power off/on. • Replace the controller board.

Code: SC816-04

Description: Interrupt in kernel communication driver
Causes: Energy save I/O subsystem detected some abnormality. • Energy save I/O subsystem defective • Energy save I/O subsystem detected a controller board error (non-response). • Error was detected during preparation for transition to STR.
Remedy: • Turn the main power off/on. • Replace the controller board.

Code: SC816-05

Description: Preparation for transition to STR failed.
Causes: Energy save I/O subsystem detected some abnormality. • Energy save I/O subsystem defective • Energy save I/O subsystem detected a controller board error (non-response). • Error was detected during preparation for transition to STR.
Remedy: • Turn the main power off/on. • Replace the controller board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie