Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D183 MP3053 OR-C2 — Trang 25/30

Code: SC854-00

Description: Bluetooth device disconnected The Bluetooth hardware (USB type) was disconnected after the machine was turned on.
Causes: The Bluetooth hardware (USB type) was disconnected after the machine was turned on.
Remedy: Turn the main power with the Bluetooth hardware (USB type) connected.

Code: SC855-01

Description: Wireless LAN board error (driver attachment failure) Wireless LAN board error (wireless LAN card: 802.11 is covered)
Causes: • Defective wireless LAN board • Loose connection
Remedy: • Turn the main power off/on. • Replace wireless LAN board

Code: SC855-02

Description: Wireless LAN board error (driver initialization failure) Wireless LAN board error (wireless LAN card: 802.11 is covered)
Causes: • Defective wireless LAN board • Loose connection
Remedy: • Turn the main power off/on. • Replace wireless LAN board

Code: SC857-00

Description: USB I/F Error The USB interface is unusable because of a driver error.
Causes: USB driver error (There are three causes of USB error: RX error/CRC error/STALL. SC is issued only in the case of STALL.)
Remedy: • Check USB connection. • Replace the controller board.

Code: SC858-01

Description: Data encryption conversion error (HDD Key Setting Error) A serious error occurred during an attempt to update the encryption key.
Causes: • Data in the USB Flash etc. corrupted • Communication error because of electromagnetic interference etc. • Controller board defective
Remedy: Replace the board.

Code: SC858-02

Description: Data encryption conversion error (NVRAM read/write error) A serious error occurred after data conversion during an attempt to update the encryption key.
Causes: NVRAM defective
Remedy: Replace the board.

Code: SC858-30

Description: Data encryption conversion error (NVRAM Before Replace error) A serious error occurred after data conversion during an attempt to update the encryption key.
Causes: Software error such as conversion parameters being invalid.
Remedy: Replace the board.

Code: SC858-31

Description: Data encryption conversion error (Other Error) A serious error occurred after data conversion during an attempt to update the encryption key.
Causes: Controller board defective
Remedy: Replace the board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie