Mã lỗi Ricoh D183 MP3053 OR-C2 — Trang 8/30
Code:
Tất cả lỗi (239)
SC101-01
SC101-02
SC102
SC120
SC121
SC141
SC142
SC144
SC161-01
SC165
SC195
SC202
SC203
SC204
SC220
SC230
SC231
SC240
SC270
SC302
SC355
SC389
SC390
SC391
SC392
SC401
SC402
SC411
SC490
SC500
SC501
SC502
SC503
SC504
SC508
SC530
SC531
SC532
SC541
SC542-01
SC542-03
SC543
SC544
SC545
SC547-01
SC547-02
SC547-03
SC547-04
SC551
SC552-01
SC552-03
SC553
SC554
SC555
SC557
SC559
SC620-01
SC620-02
SC621
SC622
SC632-00
SC633-00
SC634-00
SC635-00
SC636-01
SC636-02
SC636-11
SC637-01
SC637-02
SC650-01
SC650-04
SC650-05
SC650-13
SC650-14
SC651-01
SC651-02
SC652-00
SC653-00
SC669-01
SC669-02
SC669-03
SC669-04
SC669-05
SC669-06
SC669-07
SC669-08
SC669-09
SC669-10
SC669-11
SC669-12
SC669-13
SC669-14
SC669-15
SC669-16
SC669-17
SC669-18
SC669-19
SC669-20
SC669-21
SC669-22
SC669-23
SC669-24
SC669-25
SC669-26
SC669-36
SC670-00
SC672-10
SC672-11
SC672-12
SC672-13
SC672-99
SC687
SC701-03
SC701-08
SC702-01
SC702-02
SC702-03
SC721-03
SC721-10
SC721-11
SC721-17
SC721-24
SC721-25
SC721-27
SC721-28
SC721-30
SC721-33
SC721-41
SC721-42
SC721-44
SC721-52
SC721-53
SC721-58
SC721-59
SC721-70
SC721-71
SC721-80
SC770
SC791
SC792
SC793-01
SC793-02
SC793-03
SC793-04
SC793-05
SC793-06
SC793-07
SC793-08
SC793-09
SC793-11
SC793-12
SC794-01
SC794-02
SC794-03
SC794-04
SC794-05
SC794-06
SC794-07
SC794-08
SC794-09
SC794-10
SC794-11
SC794-12
SC816-01
SC816-02
SC816-03
SC816-04
SC816-05
SC816-07
SC816-08
SC816-09
SC816-10
SC816-11
SC816-12
SC816-13
SC816-14
SC816-15
SC816-19
SC816-20
SC816-22
SC816-23
SC816-24
SC816-25
SC816-26
SC816-29
SC816-35
SC816-36
SC841-00
SC842-00
SC842-01
SC842-02
SC853-00
SC854-00
SC855-01
SC855-02
SC857-00
SC858-01
SC858-02
SC858-30
SC858-31
SC859-01
SC859-02
SC859-10
SC860-00
SC865-00
SC866-00
SC867-00
SC868-00
SC868-01
SC868-02
SC870
SC872-00
SC873-00
SC875-01
SC875-02
SC876-01
SC876-02
SC876-03
SC876-04
SC876-05
SC876-99
SC877-00
SC880-00
SC881-01
SC899-00
SC900-00
SC901
SC920
SC921-00
SC925
SC990-00
SC991-00
SC992-00
SC995-01
SC995-02
SC995-03
SC995-04
SC997-00
SC998-00
Description: ADF Communication error After ADF connection was recognized on startup, an error is detected. (disconnection detection)
Causes: • ADF connection fault • ADF defection • IPU board defection • Noise contamination
Remedy: • Check the ADF cable connection • Replace the ADF • Replace the IPU board
Description: ADF Communication error. After ADF connection was recognized on startup, an error is detected. (Retry out due to communication error)
Causes: • ADF connection fault • ADF defection • IPU board defection • Noise contami
Remedy: • Check the ADF cable connection • Replace the ADF • Replace the IPU board
Description: Finisher communication error • Detected an error when connecting the communication line. • Received a communication error notification from the URAT.
Causes: • Finisher control board defective. • BCU defective • Connection fault between finisher and main machine.
Remedy: • Reconnect the Finisher interface cable • Replace the BCU • Replace the finisher • Turn the power off/on
Description: Paper bank communication error • Detected an error when connecting the communication line. • Received a communication error notification from the URAT.
Causes: • Paper bank control board defective • BCU defective • Paper bank-main machine connection fault
Remedy: • Reconnect the optional paper tray connection cable • Replace the BCU • Replace the optional paper tray • Turn the power off/on
Description: Counter device error 1 After 3 attempts to send a data frame to the optional counter device via the serial communication line, no ACK signal was received within 100 ms.
Causes: Serial line between the optional counter device, the relay board and copier control board is disconnected or damaged.
Remedy: • Turn the main power off/on. • Check the serial communication line.
Description: Counter device error 2 After communication was established, the controller received the brake signal from the accounting device.
Causes: Serial line between the optional counter device, the relay board and copier control board is disconnected or damaged.
Remedy: • Turn the main power off/on. • Check the serial communication line.
Description: Counter device error 3 A backup RAM error was returned by the counter device.
Causes: Counter device control board or the backup battery of counter device defective
Remedy: • Replace the counter device control board. • Replace the backup battery.
Description: Counter device error 4 A backup battery error was returned by the counter device.
Causes: Counter device control board or the backup battery of counter device defective
Remedy: • Replace the counter device control board. • Replace the backup battery.