Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D236 MPC306 GR-C2 — Trang 15/29

Code: 637-02

Description: Tracking Information notification Error (Management server error) Tracking information was lost.
Causes: Communication with tracking management server failed. • Network error • tracking management server error • Tracking SDK application error
Remedy: Cycle the main power off and on.

Code: 641-00

Description: Communication Error between Engine and Controller Although frame is sent from controller, engine does not reply to it.
Causes: • Controller Board soft error • BCU soft error • BCU and controller board connection error
Remedy: • Cycle the main power off and on. • Check the connection between the BiCU and the controller board.

Code: 650-01

Description: Remote Service Modem Communication Error (Dialup authentication failure) • An error related to communication (dialup connection, modem board etc.) using the RC Gate Type M was detected or an error that prevents RC Gate operation was detected at power on. • Displayed only when an error is detected while RC Gate is operating. • SC is not issued if an error occurs during RC Gate installation (because it can be referenced using SP).
Causes: • SP settings invalid • Modem connector disconnected • Modem board disconnected • Wireless LAN card disconnected
Remedy: Check the following SPs. • SP5-816-156 (Remote Service: Dial Up User Name) • SP5-816-157 (Remote Service: Dial Up Password)

Code: 650-04

Description: Remote Service Modem Communication Error (dialup failing because of incorrect modem configuration) • An error related to communication (dialup connection, modem board etc.) using the RC Gate Type M was detected or an error that prevents RC Gate operation was detected at power on. • Displayed only when an error is detected while RC Gate is operating. • SC is not issued if an error occurs during RC Gate installation (because it can be referenced using SP).
Causes: • SP settings invalid • Modem connector disconnected • Modem board disconnected • Wireless LAN card disconnected
Remedy: Software bug.

Code: 650-05

Description: Remote Service Modem Communication Error (insufficient current or connection fault) • An error related to communication (dialup connection, modem board etc.) using the RC Gate Type M was detected or an error that prevents RC Gate operation was detected at power on. • Displayed only when an error is detected while RC Gate is operating. • SC is not issued if an error occurs during RC Gate installation (because it can be referenced using SP).
Causes: • SP settings invalid • Modem connector disconnected • Modem board disconnected • Wireless LAN card disconnected
Remedy: The line is not supported and nothing can be done.

Code: 650-13

Description: Remote Service Modem Communication Error (RC Gate Type M was installed but modem is not present (detected during operation)) • An error related to communication (dialup connection, modem board etc.) using the RC Gate Type M was detected or an error that prevents RC Gate operation was detected at power on. • Displayed only when an error is detected while RC Gate is operating. • SC is not issued if an error occurs during RC Gate installation (because this error can be referred by using SP).
Causes: • SP settings invalid • Modem connector disconnected • Modem board disconnected • Wireless LAN card disconnected
Remedy: • If a modem board is not installed, install it. • Check again if the modem driver configurations (SP5-816-160, SP5-816-165 to 171, and SP5-816-165 to 171) are correct. • If the problem is not solved, replace the modem.

Code: 650-14

Description: Remote Service Modem Communication Error (RC Gate Type N was installed but modem is present or wired/wireless LAN is not working correctly) • An error related to communication (dialup connection, modem board etc.) using the RC Gate was detected or an error that prevents RC Gate operation was detected at power on. • Displayed only when an error is detected while RC Gate is operating. • SC is not issued if an error occurs during RC Gate installation (because this error can be referred by using SP).
Causes: • SP settings invalid • Modem connector disconnected • Modem board disconnected • Wireless LAN card disconnected
Remedy: • If a modem board is attached, remove it. • Check if wired/wireless LAN works.

Code: 651-01

Description: Illegal Remote Service Dial-up (Chat program parameter error) An unexpected error occurred when RC Gate Type M dialed up the NRS Center.
Causes: Software bug
Remedy: Logging only.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie