Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D249 MP2554 Cor-C1 — Trang 37/40

Code: SC875-02

Description: Delete all error (HDD erasure) (Data deletion failure). An error was detected before HDD/data erasure starts. (Failed to erase data/failed to logically format HDD)
Causes: • HDD logical formatting failed. • The modules failed to erase data.
Remedy: Turn the main power off/on.

Code: SC876-00

Description: Log Data Error An error was detected in the handling of the log data at power on or during machine operation.
Causes: • Damaged log data file. • Log encryption is enabled but encryption module is not installed. • Inconsistency of encryption key between NV-RAM and HDD. • Software bug.
Remedy: Try the SC876-01 to -99 solutions listed below. If it is not solved, do the following steps (for when only an HDD is replaced): 1. Disconnect the HDD and turn on the main power. 2. Execute SP5-801-019. 3. Turn off the main power. 4. Connect the HDD and turn on the main power. 5. Execute SP5-832-004. 6. Turn off the main power. * The following step is to configure the logging/encryption setting again. 7. Turn of the main power. 8. Set SP9-730-002 through -004 to 1. 9. Turn off/on the main power.

Code: SC876-01

Description: Log Data Error 1 An error was detected in the handling of the log data at power on or during machine operation.
Causes: Damaged log data file
Remedy: Initialize the HDD (SP5-832-004).

Code: SC876-02

Description: Log Data Error 2 An error was detected in the handling of the log data at power on or during machine operation.
Causes: Log encryption is enabled but encryption module is not installed.
Remedy: • Replace or set again the encryption module. • Disable the log encryption setting.

Code: SC876-03

Description: Log Data Error 3 An error was detected in the handling of the log data at power on or during machine operation.
Causes: Inconsistency of encryption key between NV-RAM and HDD.
Remedy: • Disable the log encryption setting. • Initialize LCS memory (SP5801-019). • Initialize the HDD (SP5-832-004).

Code: SC876-04

Description: Log Data Error 4 An error was detected in the handling of the log data at power on or during machine operation.
Causes: • Log encryption key is disabled but the log data file is encrypted. (NVRAM data corruption) • Log encryption key is enabled but the log data file is not encrypted. (NVRAM data corruption)
Remedy: Initialize the HDD (SP5-832-004).

Code: SC876-05

Description: Log Data Error 5 An error was detected in the handling of the log data at power on or during machine operation.
Causes: • Only the NV-RAM has been replaced with one previously used in another machine. • Only the HDD has been replaced with one previously used in another machine.
Remedy: • Attach the original NV-RAM. • Attach the original HDD. • With the configuration that caused the SC, initialize the HDD (SP5-832-004).

Code: SC876-99

Description: Log Data Error 99 An error was detected in the handling of the log data at power on or during machine operation.
Causes: Other causes
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie