Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh DD4450CP — Trang 4/4

Code: E-52

Description: Registration motor Drive IC error If the Driver IC detects an over-current or overheating condition, the machine outputs the FAULT signal. If the FAULT signal is detected, this SC appears on the display. If the same SC repeatedly appears on the display, the Driver IC may be damaged.
Causes: Registration motor MPU

Code: E-53

Description: Paper feed motor If the Driver IC detects an over-current or overheating condition, the machine outputs the FAULT signal. If the FAULT signal is detected, this SC appears on the display. If the same SC repeatedly appears on the display, the Driver IC may be damaged.
Causes: Paper feed motor MPU

Code: E-54

Description: Ri2000A Configuration error Turn on the Main switch, come out of Enegry Saving
Causes: MPU

Code: E-55

Description: GATC2 (FPGA) Configuration error
Causes: MPU

Code: E-56

Description: GATC2 (FPGA) Configuration writing error
Causes: MPU *See: Error Code (Display:E42)

Code: E-61

Description: Auto Off Switch error The main switch does not turn off for more than 6.0 seconds.
Causes: Auto off switch Auto off switch connector disconnected

Code: E-70

Description: DF Gate network error 10 seconds have passed since the original moved from the registration position, but the DF gate signal has not turned on. Note: DF gate has nothing to do with the DF (document feeder)
Causes: Network

Code: E-71

Description: DF connect error ADF model code that is different from the code for this machine is received."
Causes: Harness Main board
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie