Danh mục sản phẩm

Code :

Code: E-13
Description: Scanner error The scanner HP sensor does not turn on within 15.0 seconds after the main switch turns on. On the Initial Movement, the Scanner HP sensor does not turn off when the scanner moves 22.2 mm towards the scanning position. On the Initial Movement, the scanner HP sensor does not turn on within 2.0 seconds after the main switch turns on.
Causes: Scanner drive Scanner HP sensor Scanner motor

Code: E-14
Description: SBU Error SBU errors are most often caused by a SBU element or lamp that is in poor condition.
Causes: SBU

Code: E-17
Description: Drum Thermistor Open The thermistor output voltage is over 2.67 volts.
Causes: Thermistor connector Thermistor

Code: E-18
Description: Drum Overheat The temperature of the drum is greater than 54C when the Start key is pressed.
Causes: Drum overheat Thermistor

Code: E-21
Description: Paper Exit Timing Sensor error The paper exit timing sensor does not activate before the master eject position sensor activates.
Causes: Drum sensors Feeler

Code: E-22
Description: 2nd Feed Timing Sensor error The 2nd feed timing sensor does not activate before the paper exit timing sensor activates.
Causes: Drum sensors Feeler

Code: E-23
Description: Master Eject Position Sensor (Drum HP) error The master eject position sensor does not activate before the feed start timing sensor activates.
Causes: Drum sensors Feeler

Code: E-24
Description: Feed Start Timing Sensor error The feed start timing sensor does not activate before the 2nd feed timing sensor activates.
Causes: Drum sensors Feeler

< 1 2 3 4 >

0