Mã lỗi Ricoh DX4640PD — Trang 6/12
Description: NVRAM (ECU) version differ There is no version history in the program of NVRAM
Causes: • Incorrect firmware installed.
Description: Flash ROM (ECU) error Upload error to Flash ROM
Causes: • Defective ECU
Description: Ri10 error Ri10 cannot be started, read, written.
Causes: • Defective ECU
Description: MSU error The machine detects a failure in the memory control ASIC. The memory control ASIC cannot access to RAM normally.
Causes: • Defective ECU board • Replace the RAM on the ECU board • Defective connection of cable on ECU board
Description: Make-up RAM error The RAM for the make-up pattern data cannot be reset.
Causes: • Defective ECU
Description: Shut off solenoid lock Does not shut off for more than 6 seconds after the shut off solenoid on signal is generated.
Causes: • Defective main switch
Description: Engine response error After powering on the machine, a response is not received from the engine within the specified time.
Causes: • Loose connection between ACU and ECU board • Defective ECU board • Defective ACU board
Description: Operation Panel Error Operation panel does not display correctly
Causes: • Defective software of ACU or panel • Defective ACU