Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh G060 AP828 J — Trang 11/13

Code: SC824

Description: [1401] Self-diagnosis error: Standard NVRAM The controller cannot recognize the standard NVRAM installed or detects that the NVRAM is defective.
Causes: • Loose connection • Defective standard NVRAM • Defective controller
Remedy: 1. Turn the main switch off and on. 2. Check the standard NVRAM is firmly inserted into the socket. 3. Replace the NVRAM. 4. Replace the controller.

Code: SC827

Description: Self-diagnostic error: Standard SRAM DIMM [XXXX]: Detailed error code [0201] Verification error Error detected during a write/verify check for the standard RAM (SRAM DIMM).
Causes: • Loose connection • Defective SRAM DIMM • Defective controller
Remedy: 1. Turn the main switch off and on. 2. Replace the SRAM DIMM. 3. Replace the controller.

Code: SC828

Description: Self-diagnostic error : ROM [XXXX]: Detailed error code [0101] Check sum error 1 The boot monitor and OS program stored in the ROM DIMM is checked. If the check sum of the program is incorrect, this SC code is displayed. [0104] Check sum error 2 All areas of the ROM DIMM are checked. If the check sum of all programs stored in the ROM DIMM is incorrect, this SC code is displayed. [0105] ROM error The ROM DIMM is not of the recognized type.
Causes: • Defective ROM DIMM • Defective controller
Remedy: 1. Turn the main switch on and off. 2. Replace the ROM DIMM 3. Replace the controller.

Code: SC829

Description: Self-diagnosis error: optional RAM [XXXX]: Detailed error code [0302] Composition error (Slot 0) The result of checking the composition data of the RAM in Slot 0 (CN5) on the controller is incorrect. [0401] Verification error (Slot 1) The data stored in the RAM in Slot 1 does not match the data when reading. [0402] Composition error (Slot 1) The result of checking the composition data of the RAM in Slot 1 (CN6) on the controller is incorrect.
Causes: • Not specified RAM DIMM installed • Defective RAM DIMM
Remedy: 1. Turn the main switch off and on. 2. Replace the RAM DIMM. 3. Replace the controller board.

Code: SC833

Description: [0F21] Self-diagnostic error: I/F error The controller detects that the BCU is not properly connected.
Causes: • Loose connection • Defective controller • Defective BCU
Remedy: 1. Turn the main switch off and on. 2. Check the connection between the BCU and controller. 3. Replace the controller. 4. Replace the BCU.

Code: SC835

Description: Self-diagnosis error: Centronics interface [XXXX]: Detailed error code [1102] Verification error The controller detects that the loop-back connector is not properly connected. [110C] DMA verification error A DMA data abnormality is detected even when the loopback connector is properly set. [1120] Loop-back connector error The loop-back connector is not set when starting the detailed self-diagnostics.
Causes: • Loose connection • Defective loop-back connector • Defective Centronics connector • Defective controller
Remedy: 1. Turn the main switch off and on. 2. Check the connection between the Centronics connector and loop-back connector. 3. Reconnect the loop-back connector. 4. Replace the controller.

Code: SC836

Description: [1601] Self-diagnosis error: Font ROM (standard) The data in the font ROM (standard ROM-DIMM) is damaged. .
Causes: • Defective standard ROM-DIMM
Remedy: 1. Turn the main switch off and on. 2. Replace the standard ROM-DIMM.

Code: SC837

Description: [1602] Self-diagnosis error: Font ROM (option) The data in the font ROM (optional ROM-DIMM) is damaged.
Causes: • Defective optional ROM-DIMM
Remedy: 1. Turn the main switch off and on. 2. Replace the optional ROM-DIMM.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie