• Code: SC730
• Description: Finisher stapler position motor error Definition: [B] 1) The stapler does not return to its home position within a certain period after the stapler motor is turned on. 2) The stapler H.P sensor is not activated within a certain period after the stapler motor turned on.
• Causes: · Stapler motor defective · Stapler H.P sensor defective · Poor stapler motor connection

• Code: SC733
• Description: Finisher stack feed-out motor error Definition: [B] The stack feed-out belt H.P sensor is not activated within a certain period after the stack feed-out motor is turned on.
• Causes: · Stack feed-out H.P sensor defective · Stack feed-out motor defective

• Code: SC734
• Description: Finisher lift motor error Definition: [B] The stack height sensor is not activated within a certain period after the shift tray lift motor is turned on.
• Causes: · Shift tray lift motor defective · Stack height sensor defective

• Code: SC735
• Description: Finisher exit guide motor error Definition: [B] The exit guide plate open sensor or exit guide plate HP sensor does not activate within a certain time after the exit guide plate motor turned on.
• Causes: · Exit guide motor defective · Exit guide plate HP sensor defective · Exit guide plate open sensor defective

• Code: SC980
• Description: Program loading error Definition: [A] The program cannot load properly.
• Causes: · The connection between the engine board and the IC card is poor · IC memory card defective · Engine board defective NOTE: This SC should be cleared by trying to download again from an IC card.