Description: [0D05] Self-diagnostic error. ASIC The CPU checks if the ASIC timer works properly compared with the CPU timer. If the ASIC timer does not function in the specified range, this SC code is displayed.
Causes: • System firmware problem • Defective RAM-DIMM • Defective controller
Remedy: 1. Reinstall the controller system firmware. 2. Replace the RAM-DIMM. 3. Replace the controller board.
Description: [3003] Self-diagnostic error. HDD: Time out error When the main switch is turned on or starting the self-diagnostic, the HDD stays busy for the specified time or more.
Description: [3004] Self-diagnostic error. HDD: Command error When the main switch is turned on or starting the self-diagnostic, the diagnostic error from HDD occurs.
Description: [6101] Self-diagnostic error . NIC: MAC address check sum error The result of the MAC address check sum does not match the check sum stored in ROM.
Description: [1401] Self-diagnostic error . NVRAM [D] The controller cannot recognize the standard NVRAM installed or detects that the NVRAM is defective.