Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh G105 CL4000HDN G-P1 — Trang 13/16

Code: 827

Description: [0201] Self-diagnostic error . RAM: Verification error [D] Error detected during a write/verify check for the standard RAM (SRAM DIMM).
Causes: • Loose connection • Defective RAM DIMM • Defective controller
Remedy: 1. Replace the RAM DIMM. 2. Replace the controller.

Code: 828

Description: [0101] Self-diagnostic error . ROM: Check sum error 1 The boot monitor and OS program stored in the ROM DIMM is checked. If the check sum of the program is incorrect, this SC code is displayed.
Causes: • Defective SD card in slot 1 • Defective controller
Remedy: 1. Replace the SD card in slot 1. 2. Replace the controller.

Code: 828

Description: [0104] Self-diagnostic error . ROM: Check sum error 2 All areas of the ROM DIMM are checked. If the check sum of all programs stored in the ROM DIMM is incorrect, this SC code is displayed.
Causes: • Defective SD card in slot 1 • Defective controller
Remedy: 1. Replace the SD card in slot 1. 2. Replace the controller.

Code: 829

Description: [0302] Self-diagnostic error . RAM: Composition error (Slot 0) The result of checking the composition data of the RAM in Slot 0 (CN5) on the controller is incorrect.
Causes: • Not specified RAM DIMM installed • Defective RAM DIMM
Remedy: 1. Replace the RAM DIMM. 2. Replace the controller board.

Code: 829

Description: [0401] Self-diagnostic error . RAM: Verification error (Slot 1) The data stored in the RAM in Slot 1 does not match the data when reading.
Causes: • Not specified RAM DIMM installed • Defective RAM DIMM
Remedy: 1. Replace the RAM DIMM. 2. Replace the controller board.

Code: 829

Description: [0402] Self-diagnostic error . RAM: Composition error (Slot 1) The result of checking the composition data of the RAM in Slot 1 (CN6) on the controller is incorrect.
Causes: • Not specified RAM DIMM installed • Defective RAM DIMM
Remedy: 1. Replace the RAM DIMM. 2. Replace the controller board.

Code: 850

Description: Network interface error [B] The network is unusable.
Causes: • Defective controller
Remedy: 1. Replace the controller.

Code: 851

Description: IEEE1394 interface error [B] The 1394 interface is unusable.
Causes: • Defective IEEE1394 • Defective controller.
Remedy: 1. Replace the IEEE1394 interface board. 2. Replace the controller.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie