• Code: 233
• Description: FGATE: Off error [Y]
  The PFGATE ON signal still asserts within 5 seconds after processing the image in normal job or MUSIC for [K] ends. The PFGATE ON signal still asserts when the next job starts.
• Causes: Defective connection between the controller board and EGB. Defective cable between the EGB and LDB.
• Remedy: 1. Check the connectors. 2. Replace the LDB. 3. Replace the EGB.

• Code: 234
• Description: FGATE: On error [M]
  The PFGATE register of GAVD does not assert within 5 seconds after processing the image in normal job or MUSIC for [M] started.
• Causes: Defective connection between the controller board and EGB. Defective cable between the EGB and LDB.
• Remedy: 1. Check the connectors. 2. Replace the LDB. 3. Replace the EGB.

• Code: 235
• Description: FGATE: Off error [M]
  The PFGATE ON signal still asserts within 5 seconds after processing the image in normal job or MUSIC for [M] ends. The PFGATE ON signal still asserts when the next job starts.
• Causes: Defective connection between the controller board and EGB. Defective cable between the EGB and LDB.
• Remedy: 1. Check the connectors. 2. Replace the LDB. 3. Replace the EGB.

• Code: 236
• Description: FGATE: On error [C]
  The PFGATE register of GAVD does not assert within 5 seconds after processing the image in normal job or MUSIC for [C] started.
• Causes: Defective connection between the controller board and EGB. Defective cable between the EGB and LDB.
• Remedy: 1. Check the connectors. 2. Replace the LDB. 3. Replace the EGB.

• Code: 237
• Description: FGATE: Off error [C]
  The PFGATE ON signal still asserts within 5 seconds after processing the image in normal job or MUSIC for [C] ends. • The PFGATE ON signal still asserts when the next job starts.
• Causes: Defective connection between the controller board and EGB. Defective cable between the EGB and LDB.
• Remedy: 1. Check the connectors. 2. Replace the LDB. 3. Replace the EGB.

• Code: 240
• Description: LDB error [K]
  The EGB detects LDB error an the few times consecutively when LDB unit turns on after LDB initialization.
• Causes: Defective LDB
• Remedy: 1. Replace the LDB.

• Code: 241
• Description: LDB error [Y]
  The EGB detects LDB error a few times consecutively when LDB unit turns on after LDB initialization
• Causes: Defective LDB
• Remedy: 1. Replace the LDB.

• Code: 242
• Description: LDB error [M]
  The EGB detects LDB error a few times consecutively when LDB unit turns on after LDB initialization
• Causes: Defective LDB
• Remedy: 1. Replace the LDB.