• Code: 876
• Description: Log Data Error
• Causes: 001 Log Data Error 1 [D] • An error was detected in the handling of the log data at power on or during machine operation. This can be caused by switching the machine off while it is operating. 1. Initialize the HDD with SP5832-004. Log Data Error 2 002 [D] • The DESS module is not installed when the DESS module is set to ON. 1. Replace the DESS module. 2. Turn off the DESS module function. Log Data Error 3 003 [D] • Invalid encryption key log due to defective NVRAM data 1. Initialize the HDD with SP5832-004. 2. Disable the log encryption setting. Log Data Error 4 004 [D] • Unusual encryption function log due to the defective NVRAM data 1. Initialize the HDD with SP5832-004. Log Data Error 5 005 [D] • NVRAM or HDD, which is used in other machine, is installed. 1. Reinstall the previous NVRAM or HDD. 2. Initialize the HDD with SP5832-004. Log Data Error 99 099 [D] • Other than above causes 1. Ask your supervisor.
• Remedy:

• Code: 877
• Description: HDD Data Overwrite Security SD card error
  The all delete cannot be executed even though the Data Overwrite Security Unit (B735) is installed and activated.
• Causes: Defective SD card (B735). Not installed SD card (B735).
• Remedy: 1. Replace the NVRAM and then install the new SD card (B735). 2. Check and reinstall the SD card (B735).

• Code: 900
• Description: Electric counter error
  Abnormal data is stored in the counters.
• Causes: Defective NVRAM. Defective controller.
• Remedy: 1. Turn the main switch off and on. 2. Check the connection between the

• Code: 920
• Description: Printer function error
  The error that causes the malfunction in the software application is detected.
• Causes: Turn the main switch off/on, or install Printer Application firmware. Unexpected hardware structure (insufficient memory or hard disk space.)
• Remedy:

• Code: 921
• Description: Printer font error
  No font is detected in the machines that have the font in the SD card when the printer application is run.
• Causes: Install the System, Printer Application, NIB, and Web System firmware.
• Remedy:

• Code: 990
• Description: Software performance error 1
  The software makes an unexpected operation.
• Causes: Defective software. Defective controller. Software error.
• Remedy: 1. Reinstall the controller and/or engine main firmware. 2. See the Note at the end of the SC table.

• Code: 991
• Description: Software performance error 2
  Unexpected software error detected, which does not affect operation of the machine
• Causes: The machine does not stop and the SC code is not displayed. The machine automatically recovers. However, the SC code is logged in the engine summary sheet (SMC).
• Remedy:

• Code: 992
• Description: SC not defined
  SC that is not controlled in the system occurs
• Causes: Defective system software
• Remedy: