Mã lỗi Ricoh M001 SP4210N — Trang 3/8
Code:
Tất cả lỗi (64)
230
302
320
322
323
326
391
500
541
542
543
544
545
546
547
559
590
591
620
622
669
670
672
687
688
817
819
820
821
822
823
824
826
827
828
829
833, 834
838
851
853
854
855
856
857
860
861
863
864
865
866
867
868
870
872
873
874
875
876
880
900
920
990
991
995
Description: Fan motor error
The machine does not lock for 3sec during rotating the fusing fan motor.
Causes: Fan motor disconnected, defective. Fan motor harness loose, broken, defectiven
Description: PSU fan error
The machine does not lock for 3sec during rotating the PSU fan motor.
Causes: Defective PSU fan
Description: GAVD communication error
The machine detects an error data of the ASIC.
Causes: Defective engine board. Defective ASIC
Description: Paper tray unit communication error
Three consecutive errors occur during polling, after the paper tray unit is successful I2C communication.
Causes: Disconnect harnessesunic
Description: EEPROM Error
The EEPROM was not connected at power on, or read/write operations on the EEPROM failed.
Causes: EEPROM connected improperly. EEPROM missing
Description: Engine startup error
The BCU failed to respond within the prescribed time when the machine is turn on.
Causes: Connections between BCU and controller board are loose, disconnected, or damaged Replace the BCU. Replace the controller board.
Description: Controller startup error
After power on, the line between the controller and the operation panel did not open for normal operation. After normal startup, communication with the controller stopped.
Causes: Controller stalled. Controller installed incorrectly. Controller board defective. Operation panel harness. disconnected or defective
Description: PER-command error
The machine does not receive PAPI-PER command for specific time, after PAPI-PES was issued.
Causes: Defective controller