Description: Wireless LAN Error 2
During machine operation, the machine can get access to the board that holds the wireless LAN, but not to the wireless LAN card (802.11b or Bluetooth).
Description: HDD startup error at main power on
HDD is connected but a driver error is detected. The driver does not respond with the status of the HDD within 30 s.
Causes: HDD is not initialized. Level data is corrupted. HDD is defective
Description: HDD re-try failure
At power on the HDD was detected. Power supply to the HDD was interrupted after the system entered the energy save mode, but after the HDD was awakened from the energy save mode it did not return to the ready status within 30 sec.
Causes: Harness between HDD and controller board disconnected, defective. HDD power connector disconnected. HDD defective. Controller board defective.
Description: HDD data read failure
The data written to the HDD cannot be read normally, due to bad sectors generated during operation.
Causes: HDD defective Note: If the bad sectors are generated at the image partition, the bad sector information is written to NVRAM, and the next time the HDD is accessed, these bad sectors will not be accessed for read/write operation.
Description: HDD data CRC error
During HDD operation, the HDD cannot respond to an CRC error query. Data transfer did not execute normally while data was being written to the HDD.
Causes: HDD defective
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.