Description: SD card access error • -13 to -3: File system error • Other number: Device error
Causes: An error report is sent from the SD card reader. • An error is detected in the SD card. • Defective SD card
Remedy: 1. For a file system error, format the SD card on your PC. 2. For a device error, turn the mains switch off and on. 3. Replace the SD card. 4. Replace the controller. 5. Replace the NVRAM.
Description: Delete All error 2: Data area An error is detected while all of the HDD or NVRAM are formatted logically by the Security & Encryption Unit.
Causes: • The logical format for the HDD fails.
Remedy: Turn the main switch off/on and try the operation again
Description: Log Data Error An error was detected in the handling of the log data at power on or during machine operation. This can be caused by switching the machine off while it is operating.
Causes: -001 Log Data Error 1 • Damaged log data file in the HDD Initialize the HDD with SP5832-004. -002 Log Data Error 2 • An encryption module not installed 1. Disable the log encryption setting with SP9730-004 ("0" is off.) 2. Install the DESS module. -003 Log Data Error 3 • Invalid log encryption key due to defective NVRAM data 1. Initialize the HDD with SP5832-004. 2. Disable the log encryption setting with SP9730-004 ("0" is off.) -004 Log Data Error 4 • Unusual log encryption function due to defective NVRAM data Initialize the HDD with SP5832-004. -005 Log Data Error 5 • Installed NVRAM or HDD which is used in another machine 1. Reinstall the previous NVRAM or HDD. 2. Initialize the HDD with SP5832-004. -099 Log Data Error 99 • Other than the above causes Ask your supervisor.