Mã lỗi Ricoh M022 MPC300 Z-C1 — Trang 19/20
Description: TPM system authentication error
The system firmware is not authenticated by TPM (security chip).
Causes: • Incorrect updating for the system firmware • Defective flash ROM on the controller board
Remedy: Replace the controller board.
Description: File format converter error
The file format converter does not respond.
Causes: • Defective file format converter
Remedy: Replace the file format converter.
Description: Management area error
Causes: This is a software error than can occur: • At login • When a print job was received • When WEB browser was opened
Remedy: Cycle the machine off/on.
Description: Software error
A software error occurred in the GW controller.
Causes: • Cycle the machine off/on • Update controller firmware • Controller board defective
Remedy:
Description: Electric counter error
Abnormal data in the counters
Causes: • Defective NVRAM • Defective controller
Remedy: 1. Check the connection between the NVRAM and controller. 2. Replace the NVRAM. 3. Replace the controller.
Description: External Controller Error
The external controller alerted the machine about an error.
Causes: • Please refer to the instructions for the external controller (application)
Remedy: Please refer to the instructions for the external controller (application).
Description: Printer application error
An error is detected in the printer application program.
Causes: • Defective software • Unexpected hardware resource (e.g., memory shortage).
Remedy: 1. Software defective; switch off/on, or change the controller firmware if the problem is not solved 2. Insufficient memory
Description: Printer font error
A necessary font is not found in the SD card.
Causes: • A necessary font is not found in the SD card. • The SD card data is corrupted.
Remedy: Check that the SD card has the correct data.