Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh M078 Aficio Pro C720 AGL-P1 — Trang 20/85

Code: 442

Description: Image transfer HVPS error: M An interrupt checks the status of the HVPS every 10 ms. This SC is issued if the BCU detects a short in the HVPS for K, M, C, or Y.
Causes: • Transfer HVPS cable disconnected or damaged • Transfer HVPS defective
Remedy: 1. Check the cables or cable connections of the transfer HVPS. 2. Replace the transfer HVPS.

Code: 443

Description: Image transfer HVPS error: Y An interrupt checks the status of the HVPS every 10 ms. This SC is issued if the BCU detects a short in the HVPS for K, M, C, or Y.
Causes: • Transfer HVPS cable disconnected or damaged • Transfer HVPS defective
Remedy: 1. Check the cables or cable connections of the transfer HVPS. 2. Replace the transfer HVPS.

Code: 446

Description: ITB black lift sensor error. The ITB black/color lift sensor does not detect an "OFF" signal for 884 ms after machine initializing or for 484 ms after job end. The ITB black/color lift sensor does not detect an "ON" signal for 484 ms after a print job has been processed.
Causes: • Overload on the ITB black lift motor • Lift spring worn out • ITB black/color lift sensor defective
Remedy: 1. Clear the overload on the ITB black/color lift motor. 2. Replace the ITB black/color lift sensor.

Code: 447

Description: ITB color lift sensor error. The ITB black/color lift sensor does not detect an "OFF" signal for 884 ms after machine initializing or for 484 ms after job end. The ITB black/color lift sensor does not detect an "ON" signal for 484 ms after a print job has been processed.
Causes: • Overload on the ITB black lift motor • Lift spring worn out • ITB black/color lift sensor defective
Remedy: 1. Clear the overload on the ITB black/color lift motor. 2. Replace the ITB black/color lift sensor.

Code: 450

Description: PTR HVPS output error An interrupt checks the status of the PTR HVPS every 10 ms. This SC is issued if the BCU detects a short in the PTR HVPS 10 times within 500 ms.
Causes: • The output voltage from the PTR HVPS is leaking.
Remedy: Replace the transfer HVPS.

Code: 452

Description: PTR HVPS: low voltage error The machine detects low voltage (0.1 V or less) from the PTR HVPS.
Causes: • The resistant rate of the ITB bias roller decreases due to HH environment.
Remedy: This SC does not affect the machine's operation. This is for analytical use only.

Code: 453

Description: ITB Bias Roller End. The machine detected an abnormal reading of the resistance of the ITB bias roller because it is near the end of its service life.
Causes: • Check the connections to the transfer HVPS • Replace the image transfer roller • Transfer HVPS defective
Remedy: 1. Replace the ITB bias roller. 2. Check the harness connection to the transfer HVPS. 3. Replace the transfer HVPS.

Code: 456-001

Description: Image Transfer Roller End: K (LLL) The machine detected an abnormal reading of the resistance of the image transfer roller for Black in LLL condition because it is near the end of its service life. LLL: Absolute humidity is 2.5 g/m3 or less.
Causes: • Check the connections between the transfer HVPS and the roller. • Service life of image transfer roller for Black is near end. • Transfer HVPS defective
Remedy: 1. Replace the image transfer roller for Black. 2. Check the connections between the transfer HVPS and the roller. 3. Replace the transfer HVPS.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie