Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh M080 SP4310N S-P3 — Trang 4/13

Code: 636

Description: SDK Application Recognition Module
Causes: • Module management is set for ON but the module was not recognized. • SDK application not recognized. • Module SD card defective, or recognition file corrupted • DESS (Data Encryption Security Service) module not present Note: DESS is the data encryption module built into the GW controller board.

Code: 641

Description: Engine to controller communication error
no answer
Causes: • Examine the connection between the controller and the engine board. • Replace the engine board if the error is frequent.

Code: 650

Description: Communication error of the remote service modem (Cumin-M)
Causes:

Code: 651

Description: Incorrect dial up connection
-001: Program parameter error -002: Program execution error
Causes: An unexpected error occurs when the modem (Cumin-M) tries to call the center with a dial up connection. • Caused by a software bug No action required because this SC does not interfere with operation of the machine.

Code: 652

Description: Remote service: ID2 confict
Causes:

Code: 653

Description: Remote service: ID2 fraudct
Causes:

Code: 669

Description: EEPROM Error
The EEPROM was not connected at power on, or read/write operations on the EEPROM failed.
Causes: • EEPROM connected improperly • EEPROM missing

Code: 670

Description: Engine response error
Causes: • Engine board installed incorrectly • Engine board defective • Controller board defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie