Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Riso GR1750

Code: E 01

Description: Main Motor Lock
Displayed to interrupt the machine operation:
1) If the Drum position A is still detected by the Position A detection sensor 2 seconds after the Main motor started.
2) If the Drum position A hasn’t been detected by the Position A detection sensor within 5 seconds after the Main motor is started.

Code: E 02

Description: Elevator Motor Lock
Displayed to interrupt the machine operation:
1) If the actuator of the Elevator upper limit sensor is not raised within 9 seconds after the Elevator motor started to raise the Paper feed tray.
2) If the light path of the Elevator lower limit sensor is not blocked within 9 seconds after the Elevator motor started to lower the Paper feed tray.
3) If the light path of the Elevator lower limit sensor is blocked 2 seconds after the Elevator motor started to raise the Paper feed tray.
4) If the actuator of the Elevator upper limit sensor is still raised 2 seconds after the Elevator motor started to lower the Paper feed tray.

Code: E 03

Description: Clamp Error 1
Displayed to interrupt the machine operation:
1) If the actuator of the Clamp safety switch is still depressed 4 seconds after the Clamp solenoid was activated (turned on).
2) If the actuator of the Clamp safety switch has not been depressed within 4 sec. after the Clamp solenoid was released (turned off).
3) If the Angular magnet has not been detected by the Angular sensor (either 0° or 180°) within 8 seconds after the Clamp motor started rotating.
4) If the actuator of the Clamp safety switch is not depressed when the Clamp solenoid is not in operation.

Code: E 04

Description: Ink Overflow
Displayed to interrupt the machine operation:
1) If the Overflow sensor detects excessive ink in the Squeegee unit.

Code: E 05

Description: Print Positioning Motor Lock
Displayed to interrupt the machine operation:
1) If the Vertical centering sensor status has not been changed from ON to OFF (or OFF to ON) within 12 seconds after the Print positioning motor started rotating.

Code: E 06

Description: Pressure Detection Sensor Malfunction
Displayed to interrupt the machine operation:
1) If the Pressure detection sensor status has not been changed from ON to OFF (or OFF to ON) within 8 seconds after the Main motor started rotating.

Code: E 07

Description: Communication error between RA and RA Digitizer
Displayed to interrupt the machine operation:
1) If a communication error has occurred between the CPU and RA digitizer.

Code: E 08

Description: Communication error between RA and Interface Accessaries
Displayed to interrupt the machine operation:
1) If a communication error has occurred between the CPU and the interface accessaries.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie