Mã lỗi Riso RV9690 — Trang 16/31
Description: Clamp sensor A is OFF after the completion of the clamp unit initialization or home positioning movement.
Description: Clamp sensor B does not change within 1 second from the time the clamp motor operates in the correct direction.
Description: Clamp sensor B does not change within 1 second from the time the clamp motor operates in the reverse direction.
Description: Clamp sensor A does not go ON within 3 seconds when the clamp unit makes initialization movement.
Description: At the start of Clamp plate open/close action, the the detection sequence of clamp-sensors A & B is abnormal.
Description: At the start of print drum Positon-A compensation movement, the detection sequence of clamp-sensors A & B is abnormal.
Description: At the start of Clamp unit Home-positioning movement, the detection sequence of clamp-sensors A & B is abnormal.
Description: Clamp sensor A is ON after the clamp release action is completed.