Mã lỗi Roland AJ1000i — Trang 2/6
Code:
Tất cả lỗi (45)
0002
0004
0005
0006
0007
0008
0101
0102
0107
0110
0120
0121
0125
0126
0130
0135
0140
0141
0142
0145
0146
0147
0150
0151
0152
0160
0161
0162
0163
0164
0165
0170
0171
0172
0173
0174
0175
0180
0190
0200
0201
0202
0203
0204
0205
Description: Linear Encoder Setup has not been done.
Causes: Linear Encoder Setup has not been done.
Description: Input value from Linear Encoder is not changed when Linear Encoder is setup the origin. When Motor stops during printing, Motor does not complete the movement which is supposed to be done.
Causes: Read error of Linear Encoder. Read error of Encoder on Scan Motor side. Wire is not fixed to Head Carriage firmly.?
Description: There is a problem with Thermistor for Pre-Heater F.
Causes: Device has a problem. Thermistor Cable has short circuited or cutline.
Description: There is a problem with thermistor for Pre-Heater R.
Causes: Device has a problem. Thermistor Cable has short circuited or cutline.
Description: Heater is unusually hot. Pre-Heater F temperature has reached 60°C and above.
Causes: Heater Cable connection has a problem. Thermostat has a problem (not working). Thermistor has a problem.
Description: Heater is unusually hot. Pre-Heater F temperature has reached 60°C and above.
Causes: Heater Cable connection has a problem. Thermostat has a problem (not working). Thermistor has a problem.
Description: There is a problem with Thermistor for Print Heater.
Causes: Device has a problem. Thermistor Cable has short circuited or cutline.
Description: Heater is unusually hot. Print Heater temperature has reached 60°C and above.
Causes: Heater Cable connection has a problem. Thermostat has a problem (not working). Thermistor has a problem.