• Code: 0109
• Description: Wiper Protection Error
  Even though the machine carries out the regular movement, the output of the Wiper Origin Sensor does not reach the expected value
• Causes: Disorder of Wiper Origin Sensor Fault of Wiper Unit Fault of Wiper Origin Sensor Cut-line or short-circuit of Cable and Flexible Cable

• Code: 0110
• Description: Linear Encoder Error
  Input value from Linear Encoder is not changed when Linear Encoder is set up the Origin. When Motor stops during printing, Motor does not complete the movement which is supposed to be done.
• Causes: Read error of Linear Encoder Read error of Encoder on Scan Motor side Wire is not fixed to Head Carriage firmly.

• Code: 0111
• Description: Tool / Crop Error
  This error occurs when the machine performs the Auto Crop Mark Detection or the Auto Print / Cut adjustment without the Tool / Crop Mark Sensor Adjustment.
• Causes: Tool / Crop Mark Sensor Adjustment has not been performed

• Code: 0120
• Description: Thermistor Error (Print Heater)
  Thermistor of the Print Heater doesn't work correctly.
• Causes: Thermistor of the Print Heater is broken. There is a cut-line/short in the wiring of the Thermistor.

• Code: 0121
• Description: Thermistor Error (Dryer)
  Thermistor of the Dryer doesn't work correctly.
• Causes: Thermistor of the Dryer is broken. There is a cut-line/short in the wiring of the Thermistor.

• Code: 0125
• Description: Heater Error (Print Heater)
  Print Heater doesn't work correctly. Temperature of the Print Heater is over 60 degree Celsius.
• Causes: There is a cut-line/short in the wiring of the Print Heater. Thermostat is broken. Thermistor is broken.

• Code: 0126
• Description: Heater Error (Dryer)
  Dryer doesn't work correctly. Temperature of the Dryer is over 60 degree Celsius.
• Causes: There is a cut-line/short in the wiring of the Dryer. Thermostat is broken. Thermistor is broken.