Description: Sub CPU Communication Error
Disorder of communication with Sub CPU
Causes: Sub Board does not work correctly. Sub CPU does not work correctly. There is a bad connection between Main Board and Sub Board.
Code: 0101
Description: Limit Position Error
Limit Initialization in the Service Mode has not been done.
Causes: Limit Initialization in Service Mode has not been done.
Code: 0102
Description: Head Lock Sensor Error
Even though the machine carries out the regular movement, the output of the Head Lock Sensor does not reach the expected value.
Causes: Head Lock Sensor does not work correctly or is broken.
Code: 0103
Description: Limit Sensor Error
Even though the machine carries out the regular movement, the output of the Limit Sensor does not reach the expected value
Causes: Limit Sensor does not work correctly or is broken.
Code: 0104
Description: Cap Unit Protection Error
Even though the machine carries out the regular movement, the output of Cap Sensor does not reach the expected value.
Causes: Disorder of Cap Motor Fault of Cap Unit Fault of Cap Sensor Cut-line or short-circuit of Cable and Flexible Cable
Code: 0105
Description: Tool Carriage Connection Error
Machine fails to connect the Tool Carriage to the Head Carriage.
Causes: Fault of Tool Carriage Connection Loose of Connection Part Fault of the Limit Position Initialize value Limit Sensor does not work correctly or is broken.
Code: 0106
Description: Tool Carriage Disconnection Error
Machine fails to disconnect the Tool Carriage from the Head Carriage.
Causes: Disorder of Cap Motor Loose of Connection Part Fault of the Limit Position Initialize value Limit Sensor does not work correctly or is broken.
Code: 0107
Description: Unset up of the Linear Encoder
Linear Encoder Setup has not been done.