Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Samsung CLP415N — Trang 4/5

Code: C7-1311

Display: Not Installed Waste tank
Description: The waste toner container is not installed
Remedy: 1) Check if the waste toner container is installed properly. 2) Remove and reinstall the waste toner container.

Code: C9-1112, C9-1116

Display: Replace new Tray1 roller Replace new Tray1 roller
Description: The pick up roller or reverse roller is at the end of its life.
Remedy: 1) Turn the machine off. 2) Replace the pick up roller Assy and reverse roller Assy.

Code: M1-1110

Display: Paper Jam in Tray 1
Description: The jammed paper has occurred in the tray1.
Remedy: 1) Remove the jammed paper. 2) If the jammed paper occurs continually, check the followings. a) Check if the pick up/forward/reverse roller are worn out or contaminated. Clean the contaminated part or replace it. b) Check if the actuator is assembled correctly. 3) Check the pick up clutch and regi clutch operation. If they are defective, replace them.

Code: M1-5112

Display: Paper Empty in Tray1
Description: Paper is empty in Tray1
Remedy: 1) Take off the cassette. If there is no paper on the tray, load the paper. 2) If the problem persists, check the following. a) Check if the paper empty sensor is contaminated or defective. Replace it.

Code: M2-1110, M2-1116

Display: Paper Jam inside machine Paper jam or empty
Description: The jammed paper has occurred inside machine.
Remedy: 1) Remove the jammed paper. 2) If the problem persists, check the following. a) Check if there is any obstacles or paper on the paper path. Remove it. b) Check if the FRAME-RETARD unit is assembled properly. c) Check if the pick up clutch, regi clutch, feed drive unit are working normally. If there is a defective part, replace it.

Code: M3-1110

Display: Paper Jam in exit area
Description: The jammed paper has occurred in the exit area.
Remedy: 1) Remove the jammed paper. 2) If the problem persists, check the following. a) Check if there is any obstacles or paper on the paper path. Remove it. b) Check if the fuser unit is assembled properly. If the fuser unit is defective, replace it. c) Check if the FRAME-EXIT unit has any defective parts. Replace the FRAME-EXIT.

Code: M3-2130

Display: Output bin full Remove paper
Description: The machine detected that the output tray has got full or the bin-full sensor is defective.
Remedy: 1) Remove the paper on the output tray. 2) Check if the Bin-full Sensor connector is connected properly. Reconnect it. 3) If the sensor is defective, replace it.

Code: S2-4120

Display: Door open Close it
Description: Door is open or the cover open switch is defective.
Remedy: 1) Check if the front cover is closed perfectly. 2) If the error persists, check that the cover-open sensor is working normally. If it is defective, replace the HVPS board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie