Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Samsung CLX3305FN

Code: A1-1110

Display: Error #A1-1110 Turn off then on
Description: The main motor does not operate.
Remedy: 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Remove the rear and right cover. 3) Check if the connection between main board and main motor are correct. If the connection is OK, replace the main motor. 4) If the problem persists, replace the main board.

Code: A3-2210

Display: Error #A3-2210 Call for service
Description: CTD sensor is defective.
Remedy: 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Remove the all toner cartridges and imaging unit. 3) Check if the CTD sensor connector is connected correctly. If the sensor connection is OK, replace the CTD board.

Code: A3-3312

Display: Error #A3-3312 Call for service
Description: The outer temperature sensor is defective.
Remedy: 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Remove the front cover. 3) Replace the PBA-DEVE CRUM JOINT.

Code: A3-6110

Display: Error #A3-6110 Turn off then on
Description: The Deve Home sensor is defecitve.
Remedy: 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Remove the right cover. 3) Check if the Deve home sensor connector is connected correctly. 4) If the sensor is defective, replace it.

Code: C1-2110, C1-3110

Display: Prepare Toner
Description: The remaining toner cartridge is less than 10%
Remedy: 1) Print the supply information report. Check the life remaining of the toner cartridge. 2) If its life is at the end, turn the machine off and replace the toner cartridge with new one.

Code: C1-2120, C1-3120

Display: Replace Toner
Description: The toner cartridge is at the end of its life.
Remedy: 1) Turn the machine off and replace the toner cartridge with new one.

Code: C1-2411, C1-3411

Display: Install toner
Description: The toner cartridge is not installed or the CRUM has some problem.
Remedy: 1) Check if the toner cartridge is installed properly. Turn the machine off then on. 2) If the error message is not disappear, remove the toner cartridge. Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge. And reinstall the toner cartridge. 3) If the problem persists, check that the CRUM contact area is contaminated. Clean it. 4) If the problem persists, replace the toner cartridge with new one.

Code: C1-2512, C1-2514, C1-3512

Display: Not compatible [color] toner
Description: Toner cartridge is not compatible.
Remedy: 1) If the toner cartridge is not a Samsung genuine toner cartridge, replace with new one.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie