Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Samsung Msys 830

Code: 01

Display: RETRY REDIAL?
Description: The machine is waiting for the programmed interval to automatically redial.
Remedy: You can press START to immediately redial, or STOP to cancel the redial operation.

Code: 02

Display: COMM. ERROR
Description: A problem with the facsimile communications has occurred.
Remedy: Try again.

Code: 03

Display: DOCUMENT JAM
Description: Loaded document has Jammed in the feeder When Document Jam aeeurred at ADF module
Remedy: Clear the document Jam.

Code: 04

Display: DOOR OPEN
Description: The side cover is not securely latched.
Remedy: Clear the cover until it clicks in place.

Code: 05

Display: GROUP NOT AVAILABLE
Description: You have tried to select a group location where only a single location number can be used, such as when adding locations for a multi-dial operation.
Remedy: Try again, check location for group.

Code: 06

Display: LINE ERROR
Description: Your unit cannot connect with the remote machine, or has lost contact because of a problem on the phone line. When the machine has a problem in cause of fax data reception step
Remedy: Try again. If failure persists, wait an hour or so for the line to clear then try again.

Code: 07

Display: LOAD DOCUMENT
Description: You have attempted to set up a sending operation with no document loaded.
Remedy: Load a document and try again.

Code: 08

Display: MEMORY FULL
Description: The memory has become full.
Remedy: Either delete unnecessary documents, or retransmit after more memory becomes available, or split the transmission into more than one operation.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie