Danh mục sản phẩm

Code :

Code: 25
Display: OPEN HEAT EROR
Description: Thermister does not connected to main board or contact point is not coupled tightly in power on.
Remedy: Check thermister contact point, Heating Camp & Thermostat.

Code: 26
Display: [OVERHEAT]
Description: The printer part has overheated.
Remedy: Your unit will automatically return to the standby mode when it cools down to normal operating temperature. If failure persists, call service.

Code: 27
Display: SCANNER LOCKED
Description: Scanner is locked by locker.
Remedy: Check locker. Connect the Flat-Cable.

< 1 2 3 4

0