Danh mục sản phẩm

Code :

Code: 09
Display: LINE ERROR
Description: Your unit cannot connect with the remote machine, or has lost contact because of a problem on the phone line. When the mechine has a problem in cause of fax data reception step
Remedy: Try again. If failure persists, wait an hour or so for the line to clear then try again.

Code: 10
Display: INVALID CARTRIDGE
Description: You have used unauthorised cartridge.
Remedy: You must use a Samsung approved cartridge

Code: 11
Display: LINE BUSY
Description: The remote FAX didn’t answer
Remedy: Try again.

Code: 12
Display: LOAD DOCUMENT
Description: You have attempted to set up a sending operation with no document loaded.
Remedy: Load a document and try again.

Code: 13
Display: MEMORY FULL
Description: The memory has become full.
Remedy: Either delete unnecessary documents, or retransmit after more memory becomes available, or split the transmission into more than one operation.

Code: 14
Display: NO ANSWER
Description: The remote machine was not answered after all the redial attempts.
Remedy: Try again. Make sure the remote machine is OK.

Code: 15
Display: NO DEVELOPER CARTRIDGE
Description: When the machine detected the toner cartridge has not been installed.
Remedy: Install the Cartridge.

Code: 16
Display: NO. NOT ASSIGNED
Description: The speed dial location you tried to use has no number assigned to it.
Remedy: Dial the number manually with the keypad, or assign the number.

< 1 2 3 4 >

0