Description: Developer adjustment trouble (Over-toner abnormality). An abnormality occurred in execution of automatic developer adjustment. Sample data over-toner was detected.
Description: Developer adjustment trouble (Undertoner abnormality). An abnormality occurred in execution of automatic developer adjustment. Sample data under-toner was detected.
Description: Finisher communication trouble. Communication line test error occurs when power is turned on or after the exit of a simulation mode. Error in Finisher communication
Causes: Connection trouble or disconnection of the connector and harness between the body and the finisher. Finisher control PWB trouble Control PWB failure Malfunction by noises
Remedy: Turn off/of the power to cancel the trouble. Check connector/harness of communication line Replace the finisher control PWB.