Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp ARC260F — Trang 10/15

Code: F9 00

Description: ICU-PRT communication trouble (ICU detection)
Causes: Communication establishment error, framing, parity, protocol error
Remedy: Case 1 Cause Defective connection of the ICU/PRT PWB communication connector, defective harness between the ICU PWB and the PRT PWB, defective ICU PWB/ PRT PWB Check & Remedy Check connection and the harness between the ICU PWB and the MFP PWB. Check the machine earth. Replace the ICU or the PRT PWB.

Code: F9 01

Description: PRT DRAM trouble
Causes: DRAM in the PRT PWB cannot be accessed.
Remedy: Case 1 Cause Defective DRAM, defective installation of the DRAM Check & Remedy Replace the DRAM. Check connection of the DRAM.

Code: F9 03

Description: NIC port check error
Causes: Defective connection of the NIC connector, defective NIC PWB, defective PRT PWB
Remedy: Check the NIC connector again. Replace the HDD. Replace the PRT PWB.

Code: F9 20

Description: HDD trouble (PRT controller detection)
Causes: The HDD (option) does not operate normally in the machine with the HDD.
Remedy: Case 1 Cause Defective connection of the HDD connector, defective HDD, defective PRT PWB Check & Remedy Check the HDD again. Replace the HDD. Replace the PRT PWB.

Code: H2 00

Description: Thermistor open (HL1)
Causes: Thermistor open
Remedy: Case 1 Cause Disconnection of the fusing section connector Check & Remedy Check the connector and the harness between the thermistor and the control PWB. Case 2 Cause The fusing unit is not installed. Check & Remedy Install the fusing unit. Case 3 Cause Thermistor trouble, control PWB trouble, AC power supply trouble Check & Remedy Replace the thermistor or the control PWB. Check the AC power supply.

Code: H2 01

Description: Thermistor open (HL2)
Causes: Thermistor open
Remedy: Case 1 Cause Disconnection of the fusing section connector Check & Remedy Check the connector and the harness between the thermistor and the control PWB. Case 2 Cause The fusing unit is not installed. Check & Remedy Install the fusing unit. Case 3 Cause Thermistor trouble, control PWB trouble, AC power supply trouble Check & Remedy Replace the thermistor or the control PWB. Check the AC power supply.

Code: H3 00

Description: Fusing section high temperature trouble (THS1)
Causes: The fusing temperature exceeds 230°C.
Remedy: Common Check Use SIM 5-2 to check the heater lamp flashing operation. Case 1 Cause The heater lamp flashes properly with SIM 5-2. Thermistor trouble, disconnection of the fusing section connector Check & Remedy Check the thermistor and its harness. Cancel the error with SIM 14. Case 2 Cause The heater lamp keeps ON with SIM 5-2. Control PWB trouble, AC power supply trouble Check & Remedy Check the AC PWB and the control PWB lamp control circuit. Cancel the error with SIM 14.

Code: H3 01

Description: Fusing section high temperature trouble (THS2)
Causes: The fusing temperature exceeds 230°C.
Remedy: Common Check Use SIM 5-2 to check the heater lamp flashing operation. Case 1 Cause The heater lamp flashes properly with SIM 5-2. Thermistor trouble, disconnection of the fusing section connector Check & Remedy Check the thermistor and its harness. Cancel the error with SIM 14. Case 2 Cause The heater lamp keeps ON with SIM 5-2. AC power supply trouble, control PWB trouble Check & Remedy Check the AC PWB and the control PWB lamp control circuit. Cancel the error with SIM 14.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie