Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp ARM280 — Trang 12/12

Code: U6-03

Description: Desk No. 3 tray/LCC2 lift-up trouble
Causes: Sensor trouble Desk control PWB trouble Gear breakage Lift-up motor trouble
Remedy: Use DIAG (SIM4-2) to check the lift-up sensor detection. Use DIAG (SIM4-3) to check the lift-up motor operation.

Code: U6-10

Description: Desk/LCC transport motor trouble
Desk/LCC transport motor operation trouble
Causes: Motor lock Motor rpm abnormality Overcurrent to the motor Desk control PWB trouble
Remedy: Use DIAG (SIM4-3) to check the transport motor operation.

Code: U7-00

Description: RIC communication trouble
RIC communication trouble Communication cable test error after turning on the power or exiting DIAG.
Causes: Disconnection of connector and harness RTC control PWB trouble Control PWB (Controller) trouble Noise or interference
Remedy: Canceled by turning OFF/ON the power. Check connector and harness in the communication line.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie