Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp ARM317 — Trang 6/13

Code: F1-39

Description: Punch dust sensor trouble
Punch dust sensor detection trouble
Causes: Sensor breakage. harness breakage. Finisher control PWB trouble.
Remedy: Use SIM3-2 to check the punch dust sensor operation

Code: F1-40

Description: Punch power trouble
Panch unit power discontinuity detection
Causes: Punch control PWB defect
Remedy: Replace the punch control PWB

Code: F1-50

Description: Finisher incompatibility error
Speed does not coincide between finisher and main unit
Causes: AR-FN5N/F14 is connected to 31 sheet model
Remedy: Connect AR-FN5A. Connect AR-F14N.

Code: F1-53

Description: Interface transport unit connection trouble
Interface transport unit connector disconnection
Causes: Improper connection of connector between the finisher and the interface transport unit
Remedy: Check the interface transport unit connector.

Code: F1-81

Description: Transport motor trouble
Transport motor trouble
Causes: Motor lock. Motor rpm abnormality. Overcurrent to the motor. Finisher control PWB trouble.
Remedy: Use SIM3-3-11 to check the front transport motor operation

Code: F2-02

Description: Toner supply failure
The value judged from the actual toner supply hysteresis differs greatly from the toner sensor value.
Causes: Developing unit trouble Toner supply abnormality caused by installation of unpacked toner cartridge
Remedy: Replace the developing unit. Use SIM 25-1 to perform DV stirring.

Code: F2-04

Description: Identification error
Identification error When the CRUM trademark differs. When the CRUM company code differs.
Causes: CRUM chip failure Erroneous developing unit
Remedy: Replace the CRUM chip. Replace the developing unit.

Code: F2-58

Description: Temperature humidity sensor abnormality
Causes: Temperature humidity sensor connector disconnection. Short-circuit of the temperature humidity sensor was detected.
Remedy: Check the connection of temperature humidity sensor. Replace the temperature humidity sensor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie