Các lỗi thường gặp

Code :
  • Code: F3-12
  • Description: Machine no. 1 tray lift-up trouble
    PED does not turn ON in the specified time. LUD does not turn ON in the specified time.
  • Causes: PED/LUD trouble No. 1 tray lift-up trouble Check connection of harness between the PCVU PWB, lift-up unit, and paper feed unit.
  • Remedy: Check PED, LUD, and their harness and connectors. Check the lift-up unit.
  • Code: F3-22
  • Description: Multi purpose tray lift-up trouble
    MCPED does not turn ON in the specified time. MCLUD does not turn ON in the specified time.
  • Causes: MCPED/MCLUD trouble Multi purpose tray lift-up motor trouble Harness disconnection f the PCU PWB, the lift-up unit, and the paper feed unit.
  • Remedy: Check MCPED, PCLUD, and their harness and connectors. Check the lift-up unit.
  • Code: F6-00
  • Description: Communication trouble (ICU detection) between ICU and FAX
    Communication establishment error/Fleming/ Parity/Protocol error
  • Causes: Slave unit PWB connector disconnection Harness abnormality between slave unit PWB and ICU PWB. Slave unit PWB mother board connector pin breakage Slave unit ROM abnormality/No ROM/ Reverse insertion of ROM/ROM pin breakable
  • Remedy: Check connector harness between slave unit PWB and ICU PWB. Check grounding of machine. Check slave unit PWB ROM.
  • Code: F6-01
  • Description: FAX expansion flash memory abnormality (ICU detection)
    Expansion flash memory with SRAM backup data is installed
  • Causes: SRAM backup data is detected in expansion flash memory. Expansion flash memory in which SRAM data are backed up with SIM 66-19 is installed.
  • Remedy: Restore backup data to SRAM with SIM 66- 20, and clear expansion flash memory with SIM 66-10. If data are unnecessary, clear expansion flash memory with SIM 66- 10.
  • Code: F6-04
  • Description: FAX modem operation abnormality
    FAX PWB modem chip operation abnormality
  • Causes: The boot test pin in the FAX PWB is shorted and normal operation is tried. Modem chip operation abnormality in FAX PWB
  • Remedy: Turn on the power again without shorting the boot test pin in the FAX PWB. Replace FAX PWB.
  • Code: F7-01
  • Description: FAX board EEPROM read/write error
    EEPROM access error (read/write)
  • Causes: EEPROM trouble FAX PWB EEPROM access circuit trouble
  • Remedy: Replace FAX PWB.
  • Code: F9-02
  • Description: PRT Centro port check error
    Controller Centro port trouble
  • Causes: Centro port trouble Controller PWB trouble
  • Remedy: Replace the Controller PWB.
  • Code: F9-03
  • Description: NIC port check error
  • Causes: NIC port trouble NIC PWB trouble Controller PWB trouble
  • Remedy: Replace the NIC PWB. Replace the Controller PWB.
‹ First  < 5 6 7 8 9 10 11 >  Last ›
popup

Số lượng:

Tổng tiền:

Danh mục