Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MX6500N — Trang 16/26

Code: F3-22

Description: Tray 2 lift-up trouble
Causes: T2LUD does not turn ON within the specified time.
Remedy: Case 1 Cause T2LUD sensor trouble. Harness connection trouble between PCU PWB, the lift-up unit, and the paper feed unit. Check and remedy Check the harness and the connector of T2LUD. Case 2 Cause Tray 2 lift-up motor trouble Check and remedy Check the lift-up unit.

Code: F3-32

Description: Tray 3 lift-up trouble
Causes: LUD3 does not turn ON within the specified time.
Remedy: Case 1 Cause LUD3 sensor trouble. Harness connection trouble between PCU PWB, the lift-up unit, and the paper feed unit. Check and remedy Check the harness and the connector of LUD3. Case 2 Cause Tray 3 lift-up motor trouble Check and remedy Check the lift-up unit.

Code: F3-42

Description: Tray 4 lift-up trouble
Causes: LUD4 does not turn ON within the specified time.
Remedy: Case 1 Cause LUD4 sensor trouble. Harness connection trouble between PCU PWB, the lift-up unit, and the paper feed unit. Check and remedy Check the harness and the connector of LUD4. Case 2 Cause Tray 4 lift-up motor trouble Check and remedy Check the lift-up unit.

Code: F9-00

Description: Communication trouble between the controller and the printer controller (FIERY option)
Causes: A communication error is detected during initial establishment or after establishment of communication with the controller (FIERY option).
Remedy: Case 1 Cause Printer controller MFPcnt PWB cable trouble Check and remedy Check the printer controller MFPcnt PWB cable. Case 2 Cause MFPcnt PWB trouble, printer controller PWB trouble Check and remedy Replace the MFPcnt PWB. Repair or replace the printer controller PWB. After completion of check, turn OFF/ON the machine and the printer controller.

Code: H2-00

Description: Detection thermistor open (TH1_AD2) of the non-contact thermistor
Causes: Thermistor trouble, control PWB trouble, fusing section connector connection trouble, AC power source trouble, fusing unit not-installed
Remedy: Check the harness and the connector from the thermistor to the control PWB.

Code: H2-01

Description: Lower thermistor open (TH_LM)
Causes: Thermistor trouble, control PWB trouble, fusing section connector connection trouble, AC power source trouble, fusing unit not-installed
Remedy: Check the harness and the connector from the thermistor to the control PWB.

Code: H2-02

Description: Sub thermistor open (TH_US)
Causes: Thermistor trouble, control PWB trouble, fusing section connector connection trouble, AC power source trouble, fusing unit not-installed
Remedy: Check the harness and the connector from the thermistor to the control PWB.

Code: H2-03

Description: Non-contact thermistor compensation thermistor open (TH1_AD1)
Causes: Thermistor trouble, control PWB trouble, fusing section connector connection trouble, AC power source trouble
Remedy: Check the harness and the connector from the thermistor to the control PWB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie